Mercury Mariner Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercury Mariner Fuel Injector Replacement is $328 with $188 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2009 Mercury MarinerL4-2.5L Hybrid	Service typeFuel Injector Replacement	Estimate$530.32	Shop/Dealer Price$627.75 - $911.94
2010 Mercury MarinerV6-3.0L	Service typeFuel Injector Replacement	Estimate$1560.38	Shop/Dealer Price$1877.68 - $2820.92
2007 Mercury MarinerV6-3.0L	Service typeFuel Injector Replacement	Estimate$1771.10	Shop/Dealer Price$2154.99 - $3299.55
2008 Mercury MarinerL4-2.3L Hybrid	Service typeFuel Injector Replacement	Estimate$1070.35	Shop/Dealer Price$1303.30 - $1997.96
2011 Mercury MarinerL4-2.5L Hybrid	Service typeFuel Injector Replacement	Estimate$521.31	Shop/Dealer Price$618.47 - $902.46
2006 Mercury MarinerL4-2.3L	Service typeFuel Injector Replacement	Estimate$1493.14	Shop/Dealer Price$1787.07 - $2658.54
2005 Mercury MarinerV6-3.0L	Service typeFuel Injector Replacement	Estimate$1771.10	Shop/Dealer Price$2155.02 - $3299.60
2006 Mercury MarinerL4-2.3L Hybrid	Service typeFuel Injector Replacement	Estimate$1493.14	Shop/Dealer Price$1786.75 - $2657.97

Show example Mercury Mariner Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(178)

Rating Summary

168

7

1

0

2

168

7

1

0

2

SEE REVIEWS NEAR ME

Jeff

34 years of experience

441 reviews

Jeff

34 years of experience

by john

Mercury Mariner V6-3.0L - Car is not starting - Citrus Heights, California

very pleasant . seemed to know what the problem was and how to fix it

Brandon

21 years of experience

773 reviews

Request Brandon

Brandon

21 years of experience

Request Brandon

by Mark

Mercury Mariner V6-3.0L - Engine or Transmission Mount Replacement - Ocoee, Florida

On time, very knowledgeable, great service!

Christopher

23 years of experience

13 reviews

Request Christopher

Christopher

23 years of experience

Request Christopher

by Dani

Mercury Mariner V6-3.0L - Car is not starting - Moraga, California

Very friendly, professional and fixed my car!!

Jeremy

21 years of experience

802 reviews

Jeremy

21 years of experience

by Loretra

Mercury Mariner V6-3.0L - Noise from engine or exhaust - Boynton Beach, Florida

I have to the first time here my came our to inspect my car after someone else work on it and did not fix it I felt he did a very good job he's very positive and very confident of his work and very polite and he did it very fast and done well

Excellent Rating

(178)

Rating Summary

168

7

1

0

2

168

7

1

0

2

SEE REVIEWS NEAR ME

Recent articles & questions

P0329 OBD-II Trouble Code: Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0329 P0329 code definition? Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor) What the P0329 code means A knock sensor is used to optimize engine performance. It also helps protect the engine against potentially dangerous and power...

Can I Use Synthetic Motor Oil in My Brand New Car?

Changing oil on time will help protect your engine from damage. Synthetic motor oil will likely work, and may actually be required, in your new car.

How to Transfer a Car Title in New York

In In New York, the title to a car shows who owns it. As ownership of a vehicle changes through buying and selling, or being given as a gift, or as part of an inheritance, the title must be updated....

I'm having problem with my electrical in my 2004 Oldsmobile Alero the driver Wendell do not let down the passenger window let down

Hi Emmanuel. Thanks for contacting us tonight. When you have an electrical issue like this, the first step is to determine the root source of the problem. In your case, since you are frequently blowing a fuse, its more than...

I have a 2006 nissan altima and it crank but it will not start. What is the problem?

Hi Drico. Thanks for contacting us today. There could be a few different issues causing your hard starting issues. First, if you turn the key and the engine cranks over, then power is not your issue. This would likely be...

I just had a new radiator installed because the old one was leaking heavily. After I took it home, the exhaust is now emitting white smoke. I just wanted to get a second opinion.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com