Mercedes-Benz S420 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Mercedes-Benz S420 Throttle Body Replacement is $2081 with $1927 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Mercedes-Benz S420V8-4.2LService typeThrottle Body ReplacementEstimate$4055.96Shop/Dealer Price$5027.77 - $7924.75
1996 Mercedes-Benz S420V8-4.2LService typeThrottle Body ReplacementEstimate$4414.75Shop/Dealer Price$5475.16 - $8647.01
1999 Mercedes-Benz S420V8-4.2LService typeThrottle Body ReplacementEstimate$4385.55Shop/Dealer Price$5445.37 - $8616.77
1997 Mercedes-Benz S420V8-4.2LService typeThrottle Body ReplacementEstimate$4414.75Shop/Dealer Price$5475.21 - $8647.10
1998 Mercedes-Benz S420V8-4.2LService typeThrottle Body ReplacementEstimate$4385.55Shop/Dealer Price$5448.20 - $8621.73
1994 Mercedes-Benz S420V8-4.2LService typeThrottle Body ReplacementEstimate$4044.25Shop/Dealer Price$5012.41 - $7906.66
Show example Mercedes-Benz S420 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Mercedes-Benz S420 V8-4.2L - Oil Change - Los Angeles, California
He is the real deal... On time, did great work, very all together" good man and mechanic...... Thanks Kenneth.

Tam

23 years of experience
251 reviews
Tam
23 years of experience
Mercedes-Benz S420 V8-4.2L - Fuel Filter - San Francisco, California

Eric

16 years of experience
138 reviews
Eric
16 years of experience
Mercedes-Benz S420 V8-4.2L - Oil Change - Bowie, Maryland
Kept me informed for his arrival. Was very friendly.

Fernando

14 years of experience
160 reviews
Fernando
14 years of experience
Mercedes-Benz S420 V8-4.2L - Check Engine Light is on - Phoenix, Arizona
Awesome  service thank you

Excellent Rating

(15)

Rating Summary
14
0
1
0
0
14
0
1
0
0
Number of Mercedes-Benz S420 services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Power Steering Pump
If you hear squealing noises, the steering wheel feels stiff, or find damage on the power steering belt, have the power steering pump replaced.
P2090 OBD-II Trouble Code: 'B' Camshaft Position Actuator Control Circuit Low Bank 1
P2090 P2090 Code Definition The P2090 code is a generic powertrain code related to fuel and air metering and auxiliary emission controls. This code appears when the engine control module (ECM) has detected variances between camshaft B and the crankshaft...
A Buyer’s Guide to the 2012 Ford Fusion Hybrid
The The 2012 Ford Fusion Hybrid is a really great choice for anyone looking for a mid-size sedan. Not only does it boast plenty of room for people and cargo, but it also has a good amount of power and...

Why is my ABS warning light on?

Your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system which are controlled by the car's ECU. When the ECU...

Bmw locks and window not working

The blown fuse indicates an electrical short. Since it happens when either operating the windows or door locks, the short may be somewhere in the driver's door and/or door harness. Some vehicles can develop shorts in the driver's door wiring...

when i step on the gas pedal i hear a popping sound

The term popping sound most often comes up to describe the sound made by CV and Universal joints. Of course from where I sit I can't interpret the sound your land rover is making, but CV and universal joints are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com