Mercedes-Benz E350 Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(533)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(533)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Mercedes-Benz E350 Power Steering Pump Replacement is $742 with $434 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Mercedes-Benz E350V6-3.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1352.28Shop/Dealer Price$1618.96 - $2387.82
2014 Mercedes-Benz E350V6-3.5LService typePower Steering Pump ReplacementEstimate$1435.98Shop/Dealer Price$1721.74 - $2563.13
2012 Mercedes-Benz E350V6-3.5LService typePower Steering Pump ReplacementEstimate$1435.98Shop/Dealer Price$1721.84 - $2563.30
2007 Mercedes-Benz E350V6-3.5LService typePower Steering Pump ReplacementEstimate$1623.39Shop/Dealer Price$1929.50 - $2825.88
2016 Mercedes-Benz E350V6-3.5LService typePower Steering Pump ReplacementEstimate$1189.12Shop/Dealer Price$1418.93 - $2079.50
2015 Mercedes-Benz E350V6-3.5LService typePower Steering Pump ReplacementEstimate$1189.12Shop/Dealer Price$1413.80 - $2070.52
2006 Mercedes-Benz E350V6-3.5LService typePower Steering Pump ReplacementEstimate$1535.80Shop/Dealer Price$1840.02 - $2734.99
2013 Mercedes-Benz E350V6-3.0L Turbo DieselService typePower Steering Pump ReplacementEstimate$1435.98Shop/Dealer Price$1721.83 - $2563.29
Show example Mercedes-Benz E350 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(533)

Rating Summary
497
17
6
1
12
497
17
6
1
12

Raymond

28 years of experience
280 reviews
Raymond
28 years of experience
Mercedes-Benz E350 V6-3.5L - Power Steering Pump - Victorville, California
Ray was honest, on time and did a great job.

Tavaris

15 years of experience
93 reviews
Tavaris
15 years of experience
Mercedes-Benz E350 V6-3.5L - Universal Joint (U-joint) - Rex, Georgia
Tarvis was nice and polite, but arrived late. The wrong job was performed on my car, but it wasn't his fault. He did the job fast alghough it was the wrong issue. This company as a whole is not holding up their part. I was charged before the wrong job was completed. I was refused a refund, so I did a dispute with my bank. I will not use this company again.

Mark

15 years of experience
73 reviews
Mark
15 years of experience
Mercedes-Benz E350 V6-3.5L - Tire Rotation - Indianapolis, Indiana
Mark did a thorough and timely job on my vehicle. Will book again.

Kris

17 years of experience
97 reviews
Kris
17 years of experience
Mercedes-Benz E350 V6-3.5L - Oil Change - Atlanta, Georgia
Great

Excellent Rating

(533)

Rating Summary
497
17
6
1
12
497
17
6
1
12
Number of Mercedes-Benz E350 services completed
5863+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a PCV Filter Last?
The The Positive Crankcase Ventilation, also known as a PCV valve, helps relieve some of the excess pressure produced in your vehicle's crankcase. Using a filtered air flow, the PCV system draws fumes and vapors from the crankcase and reroutes...
How to Buy a Personalized License Plate in Maine
If If you want to stand out a little bit, and make your car special and unique, a personalized license plate may be perfect for you. With a personalized Maine license plate, you can choose a custom message to be...
How Much Does a Mechanic Make in Florida?
Automotive technician jobs in Florida have an mean salary of $38k, with some mechanics earning as much as $40k.

How do I cancel cruise control?

There are three easy ways to cancel the cruise control: 1. Press the CRUISE button, which is located on the steering wheel. 2. Press the CANCEL button, which is located on the steering wheel. 3. Press the brake pedal. When...

Random misfire in race car

If you are running a 13:1 compression in an engine then you will have to have high octane fuel. The first thing to do you should do is to check all the plugs to see if one is fouling out,...

Reduced Power Light

Hello, thank you for writing in. The Reduced Power Warning Light will illuminate for several reasons. If the engine's computer detects an issue that can be detrimental to the engine, it will automatically reduce the power to make sure no...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com