Mercedes-Benz CLS550 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(86)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(86)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Mercedes-Benz CLS550 Front Crankshaft Seal Replacement is $181 with $27 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz CLS550V8-4.7L TurboService typeFront Crankshaft Seal ReplacementEstimate$225.20Shop/Dealer Price$242.84 - $286.83
2015 Mercedes-Benz CLS550V8-4.7L TurboService typeFront Crankshaft Seal ReplacementEstimate$215.29Shop/Dealer Price$230.98 - $273.52
2016 Mercedes-Benz CLS550V8-4.7L TurboService typeFront Crankshaft Seal ReplacementEstimate$215.29Shop/Dealer Price$231.01 - $273.57
2008 Mercedes-Benz CLS550V8-5.5LService typeFront Crankshaft Seal ReplacementEstimate$221.89Shop/Dealer Price$240.79 - $289.45
2011 Mercedes-Benz CLS550V8-5.5LService typeFront Crankshaft Seal ReplacementEstimate$221.89Shop/Dealer Price$243.63 - $294.41
2013 Mercedes-Benz CLS550V8-4.7L TurboService typeFront Crankshaft Seal ReplacementEstimate$215.29Shop/Dealer Price$231.16 - $273.84
2009 Mercedes-Benz CLS550V8-5.5LService typeFront Crankshaft Seal ReplacementEstimate$221.89Shop/Dealer Price$240.82 - $289.50
2007 Mercedes-Benz CLS550V8-5.5LService typeFront Crankshaft Seal ReplacementEstimate$221.89Shop/Dealer Price$240.79 - $289.45
Show example Mercedes-Benz CLS550 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(86)

Rating Summary
77
2
1
2
4
77
2
1
2
4

Craig

19 years of experience
56 reviews
Craig
19 years of experience
Mercedes-Benz CLS550 V8-5.5L - Battery - La Mesa, California
He is a very pleasant fellow and efficient.

David

29 years of experience
142 reviews
David
29 years of experience
Mercedes-Benz CLS550 V8-5.5L - Brake Pads Replacement (Rear) - San Diego, California
David was on time, extremely professional and polite. The service (brake pads changed) I had scheduled was more than I needed and David saw to it that I was only charged for the work he performed; I was quoted to have all the pads changed but only need the back set done. Definitely happy with the service he provided and will certainly use this service again for my future car needs. It was refreshing to deal with a mechanic that wasn't out to take my money for services I really didn't need; this was the first time i didn't feel taken advantage of when it came to servicing my car.

Joseph

21 years of experience
718 reviews
Joseph
21 years of experience
Mercedes-Benz CLS550 V8-5.5L - Serpentine/Drive Belt - West Jordan, Utah
He did amazing! Will be booking him again!

Carlos

29 years of experience
601 reviews
Carlos
29 years of experience
Mercedes-Benz CLS550 V8-5.5L - Heater Blower Motor Resistor - Diamond Bar, California
Very professional and personable Did a good job

Excellent Rating

(86)

Rating Summary
77
2
1
2
4
77
2
1
2
4
Number of Mercedes-Benz CLS550 services completed
946+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Land Rover LR4
There’s There’s just something about a Land Rover. Maybe it’s that easily discernible English air, or the fact that it subtly calls out “luxury” while maintaining that off-road ruggedness that tells you it’s no prissy city car. The 2012 LR4...
How Long Does a Fuel Meter Assembly Last?
Knowing Knowing how much gas is in your car is important and can help you to avoid being broken down on the side of the road. The only way that you will be able to find out when your car...
P2077 OBD-II Trouble Code: Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit Low
P2077 P2077 code definition Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit Low What the P2077 code means P2077 is an OBD-II generic code for the Engine Control Module (ECM), detecting the intake manifold tuning valve position sensor circuit Pulse...

Car not shifting from park into reverse or drive

Your shifter has a mechanical connection to the transmission by a cable. When you move the shifter it pulls on a cable and moves the shift assembly on the transmission to put it in the correct gear. If you can...

Car is giving codes P0032 and P0038 and stalls

Hi there. Diagnoses needs to be performed. As you already know, replacing components can be expensive and time consuming without resolution. The P0032 (https://www.yourmechanic.com/article/p0032-obd-ii-trouble-code-ho2s-heater-control-circuit-high-bank-1-sensor-1-by-john-nelson) and P0038 codes could be the result of a blown fuse (https://www.yourmechanic.com/services/fuse-replacement), a wiring issue from...

Out of engine oil

The sound you are hearing is likely related to the lack of sufficient oil (https://www.yourmechanic.com/services/oil-level-is-low-inspection) in the motor, which may have also caused the motor to overheat and shut down. When this happens, a number of things may cause the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com