Isuzu i-350 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(329)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(329)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Isuzu i-350 Throttle Body Replacement is $707 with $567 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Isuzu i-350L5-3.5LService typeThrottle Body ReplacementEstimate$1288.82Shop/Dealer Price$1575.88 - $2428.94
Show example Isuzu i-350 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8

Walter

47 years of experience
416 reviews
Walter
47 years of experience
Isuzu Trooper V6-2.8L - Oil Change - Tulsa, Oklahoma
Very nice man! Did the job and then some.

John

33 years of experience
1126 reviews
John
33 years of experience
Isuzu Ascender L6-4.2L - Wheel Bearings Replacement (Passenger Side Front) - Pearland, Texas
John was pleasant, efficient, and explained everything he was doing and why in terms a non-mechanic like myself understood. When he was delayed at his previous appointment to min e he made sure he notified me in plenty of time and kept me updated on his arrival time.

Martin

30 years of experience
166 reviews
Martin
30 years of experience
Isuzu Ascender L6-4.2L - Car is shaking or vibrating - Hendersonville, Tennessee
Very nice and knowledgeable. Quickly diagnosed my vehicles problem(s)

Gustavo

16 years of experience
103 reviews
Gustavo
16 years of experience
Isuzu Ascender L6-4.2L - Brake Pads Replacement (Front, Rear) - Bergenfield, New Jersey
Knowledgeable , Professional, and Trustworthy .

Excellent Rating

(329)

Rating Summary
305
14
0
2
8
305
14
0
2
8
Number of Isuzu services completed
3619+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

P0441 OBD-II Trouble Code: Evaporative Emission Control System Incorrect Purge Flow
P0441 code definition The P0441 diagnostic trouble code will be set when a malfunction is detected within the EVAP control circuit. This...
How to Know What Kind of Hoist to Buy
When When it comes to vehicle repairs, maintenance, and storage, there is a segment of the population that takes it very seriously. Professional-grade tools, large home garages or shops, and even vehicle hoists are part of their repertoire for completing...
Veteran and Military Driver Laws and Benefits in Kansas
The The state of Kansas offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Disabled veteran registration fee waiver Disabled veterans...

Car windows going down, but not up

Hi there. The power windows in your car are computer controlled. They have safety features such as anti-trapping windows. It’s highly irregular that both or all four windows stopped going up at the same time. But when presented with weird...

how do i notice that car bearing need to be replaced im using ford figo

Worn out wheel bearings (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings) make a rumbling sound. If you jack up the rear of the vehicle and spin the wheel by hand, you can feel and hear the worn bearing. Compare it to the other side. You also...

My car won't start and the word fuse is lighting up on my cluster. What does it mean?

Hi there. The fuse light will come on if the engine is not starting up for more than 15 seconds. This is a fail safe light that warns the driver that the starting circuit has a fault and needs attention....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com