GMC V2500 Suburban Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(39)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(39)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a GMC V2500 Suburban Headlight Bulb Replacement is $167 with $27 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 GMC V2500 SuburbanV8-5.7LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$208.10Shop/Dealer Price$224.98 - $267.50
1991 GMC V2500 SuburbanV8-6.2L DieselService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.20 - $255.40
1991 GMC V2500 SuburbanV8-6.2L DieselService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
1991 GMC V2500 SuburbanV8-6.2L DieselService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
1990 GMC V2500 SuburbanV8-6.2L DieselService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$215.70 - $258.02
1990 GMC V2500 SuburbanV8-5.7LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.36 - $255.69
1990 GMC V2500 SuburbanV8-6.2L DieselService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.24 - $255.47
1990 GMC V2500 SuburbanV8-5.7LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
Show example GMC V2500 Suburban Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(39)

Rating Summary
38
1
0
0
0
38
1
0
0
0

Quentin

23 years of experience
213 reviews
Quentin
23 years of experience
GMC Sierra 1500 V8-6.2L - Headlight Bulb Replacement (Driver Side Low Beam) - Houston, Texas
Thanks Quentin A very fast and professional repair

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
GMC Acadia V6-3.6L - Headlight Bulb Replacement (Driver Side Low Beam) - Alpharetta, Georgia
First time using service, will DEFINITELY do it again!

Augie

32 years of experience
263 reviews
Augie
32 years of experience
GMC Sierra 2500 HD V8-6.6L Turbo Diesel - Headlight Bulb Replacement (Driver Side Low Beam) - Valencia, California
This was my first time using "Your Mechanic" and I was very pleased. On time, no issues and Augie is a nice guy!

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
GMC Canyon L5-3.5L - Headlight Bulb Replacement (Driver Side Low Beam) - Lincoln, California
Excellent Job!!!! Very Professional

Excellent Rating

(39)

Rating Summary
38
1
0
0
0
38
1
0
0
0
Number of GMC Headlight Bulb Replacement services completed
429+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Install a Steering Column
A steering column fails if it makes a clicking sound, it seems loose or rough when operating, or the steering tilt does not lock.
Symptoms of Bad or Failing Exhaust Supports
Common signs include the exhaust pipe seeming loose or swaying, the muffler hanging to the ground, and the exhaust sounding louder than usual.
10 Best Stores to Buy Auto Parts in San Francisco, California
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in San Francisco is O’Reilly Auto Parts.

Is this a bad strut mount/strut bearing?

Hi there. Thanks for the video. The angle on the video is a bit misleading, but could be a strut mount that is the source. Another possible source could be a wheel bearing. If you are not hearing any harmonic...

Where is the starter located on a 2005 ford escape hybrid?

The starter is above the oil filter and opposite the A/C compressor (on the same "side" of the engine as the A/C compressor). The starter may be obscured by a splash shield that indeed must be removed to replace the...

Car seized while driving and won't start but engine turns over

If the engine had seized because of low oil, you would have heard some excessive engine noise and probably had some overheating as well. In the absence of those signs, your problem may even be something minor. But knowing that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com