Ford Fiesta Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(280)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(280)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Ford Fiesta Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Ford FiestaL4-1.6L TurboService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Ford FiestaL4-1.6L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Ford FiestaL4-1.6L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Ford FiestaL4-1.6LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2018 Ford FiestaL4-1.6LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Ford FiestaL4-1.6LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Ford FiestaL4-1.6LService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2017 Ford FiestaL3-1.0L TurboService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford Fiesta Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(280)

Rating Summary
265
5
2
2
6
265
5
2
2
6

Joseph

20 years of experience
640 reviews
Joseph
20 years of experience
Ford Fiesta L4-1.6L - Cooling/Radiator Fan Motor - Salt Lake City, Utah
Really great service, he's always thorough and helpful. I'd recommend him to anyone!

Daniel

11 years of experience
52 reviews
Daniel
11 years of experience
Ford Fiesta L4-1.6L - Exterior Door Handle Replacement (Passenger Side Front, Passenger Side Rear) - Sacramento, California
Daniel provided great service! He was early and managed to do the work in a timely manner. I would recommend him to customers in the future and use him again.

Edgar

8 years of experience
202 reviews
Edgar
8 years of experience
Ford Fiesta L4-1.6L - Brake fluid is leaking - Austin, Texas
Arrived on time and works quick. Overall a better price than the dealership.

Victor

11 years of experience
211 reviews
Victor
11 years of experience
Ford Fiesta L4-1.6L - Oxygen Sensor Replacement (Rear/Lower/Downstream) - Virginia Beach, Virginia
The only mechanic I trust!!!

Excellent Rating

(280)

Rating Summary
265
5
2
2
6
265
5
2
2
6
Number of Ford Fiesta services completed
3080+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

The Guide to Legal Car Modifications in Minnesota
ARENA Creative / Shutterstock.com Whether currently living in the state or planning to move to Minnesota in the near future, you need to make sure that you understand the restrictions on vehicle modifications. The following will help...
Nebraska Parking Laws: Understanding the Basics
Even Even though you are well acquainted with all of the rules of the road and you are safe and abide by the law when driving, you need to make sure you take the same level of care when it...
P2044 OBD-II Trouble Code: Reductant Temperature Sensor Circuit Low Input
P2044 P2044 code definition Reductant temperature sensor circuit low input What the P2044 code means This trouble code indicates that the powertrain control module (PCM) has detected a malfunction with the exhaust temperature/pressure sensor. This can be due to a...

Clutch stuck first reverse

It definitely sounds like a clutch hydraulic issue where fluid is leaking by a seal on the master or slave cylinder until the cylinder heats up and the seal is restored. The clutch slave cylinder housing is closest to the...

Why does my car takes about 10 minutes to warn up everytime it sets for a couple of hours

The thermostat may be stuck partly open if it takes longer to warm up than it used to as long and the outside air temperature is not below freezing. If outside air is very cold than the engine would cool...

2011 Ford Fusion won't shift gears.

The first thing to check would be the transmission fluid level. If the fluid level is low from a leak, this may cause the transmission to slip and when revved to higher rpm it may jerk when the line pressure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com