Chevrolet Bolt EV Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Chevrolet Bolt EV Wheel Bearings Replacement is $260 with $120 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Chevrolet Bolt EVElectricService typeWheel Bearings - Driver Side Rear ReplacementEstimate$440.62Shop/Dealer Price$505.08 - $687.93
2018 Chevrolet Bolt EVElectricService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$428.91Shop/Dealer Price$491.07 - $672.20
2018 Chevrolet Bolt EVElectricService typeWheel Bearings - Driver Side Front ReplacementEstimate$385.11Shop/Dealer Price$446.75 - $627.48
2017 Chevrolet Bolt EVElectricService typeWheel Bearings - Driver Side Rear ReplacementEstimate$428.91Shop/Dealer Price$491.10 - $672.25
2017 Chevrolet Bolt EVElectricService typeWheel Bearings - Driver Side Front ReplacementEstimate$385.11Shop/Dealer Price$448.22 - $630.06
2017 Chevrolet Bolt EVElectricService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$428.91Shop/Dealer Price$491.28 - $672.57
2017 Chevrolet Bolt EVElectricService typeWheel Bearings - Passenger Side Front ReplacementEstimate$385.11Shop/Dealer Price$446.76 - $627.51
2018 Chevrolet Bolt EVElectricService typeWheel Bearings - Passenger Side Front ReplacementEstimate$385.11Shop/Dealer Price$446.75 - $627.48
Show example Chevrolet Bolt EV Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Jason

33 years of experience
617 reviews
Jason
33 years of experience
Chevrolet Bolt EV Electric - ABS Speed Sensor Replacement (Driver Side Front) - San Mateo, California
Nice guy. Competent.

Pierre

10 years of experience
366 reviews
Pierre
10 years of experience
Chevrolet Bolt EV Electric - Pre-purchase Car Inspection - Roslindale, Massachusetts
Pierre was a real professional. On-time, clear communication, performed a thorough pre-purchase inspection, and documented his findings. Would definitely reach out to Pierre for future needs!

Andre

17 years of experience
55 reviews
Andre
17 years of experience
Chevrolet Bolt EV Electric - Pre-purchase Car Inspection - Laurel, Maryland
He was on time communication in HIGH level very nice and very professional

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Chevrolet Bolt EV Electric - Tire Rotation - Berkeley, California
Tien provides expert service. He's efficient, helpful and communicates well. 10 out of 10!

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Chevrolet Bolt EV services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Choose the Right Brake Pads
Choosing the right brake pads for your car depends on when they’re replaced, what material they're made of, and whether they’re reliably sourced.
Is an Aftermarket Car Part as Good as an OEM Car Part?
Aftermarket parts are often seen as being of lower quality than OEM car parts but they offer more variety and can be a great cheap auto part option.
P0200 OBD-II Trouble Code: Injector Circuit Malfunction
P0200 code definition P0200 is a generic OBD-II diagnostic trouble code in reference with the injector circuit Note: This code is similar...

Ticking noise coming from the driver's side of the engine

Often, that would be lifters making a noise. So, the first thing you'd want to do is get some good engine oil flush (https://www.yourmechanic.com/article/what-does-it-mean-to-flush-fluids-in-a-car) and have the engine flushed out, and then change the oil and filter (https://www.yourmechanic.com/services/change-oil-and-filter). A lot...

I crossed the lines on one of the new batteries & SPARK went the post, I screwed the pooch...

I have seen many different outcomes when it comes to hooking the battery up backwards. If you disconnected the cables as soon as you hooked them up wrong you should not need to replace the battery. Once you hook up...

How do you start car after running out of exhaust fluid?

Hi there. There is a sensor in the diesel exhaust fluid tank that measures how much fluid is in there. This is why the dash can tell you how much fluid is remaining in the tank. The engine will not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com