BMW 435i xDrive Gran Coupe Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(442)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(442)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a BMW 435i xDrive Gran Coupe Car Battery Replacement is $390 with $250 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 BMW 435i xDrive Gran CoupeL6-3.0L TurboService typeCar Battery ReplacementEstimate$655.36Shop/Dealer Price$786.75 - $1166.75
2015 BMW 435i xDrive Gran CoupeL6-3.0L TurboService typeCar Battery ReplacementEstimate$646.35Shop/Dealer Price$774.65 - $1152.33
Show example BMW 435i xDrive Gran Coupe Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(442)

Rating Summary
429
6
4
2
1
429
6
4
2
1

Okela

14 years of experience
80 reviews
Okela
14 years of experience
BMW 435i xDrive Gran Coupe L6-3.0L Turbo - Serpentine/Drive Belt - Rosedale, New York
He was Great!!!!! On time and kept me in the loop. It was cold outside, but that didn’t seem to affect his Professionalism. He Explained what the problem was and went to work. He finished within the time quoted and even made sure i was Happy with the work done. I’ll recommend him to any and everyone i know that has any car trouble, or just needs maintainance done. GREAT MECHANIC!!!!!

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
BMW 535i GT xDrive L6-3.0L Turbo - Battery - Renton, Washington
Theodore’s expert in cars

Luke

18 years of experience
322 reviews
Luke
18 years of experience
BMW 650i V8-4.8L - Battery - Austin, Texas
Luke was a great communicator, punctual and professional.

Ricardo

15 years of experience
339 reviews
Ricardo
15 years of experience
BMW X5 V8-4.8L - Battery - Beverly Hills, California
Ricardo went beyond great service to exceptional. He was very knowledgeable about my car and understood everything I was asking. Gave me answers that made sense. I was very pleased with the outcome. I do plan on asking for him every time I call upon My Mechanic again.

Excellent Rating

(442)

Rating Summary
429
6
4
2
1
429
6
4
2
1
Number of BMW Car Battery Replacement services completed
4862+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

P2653 OBD-II Trouble Code: B Rocker Arm Actuator Control Circuit Low Bank1
P2653 means an open or shorted circuit in the B rocker arm actuator control circuit in bank 1 due to broken oil control valve or low oil levels.
Can You Switch Between Regular and Synthetic Motor Oil?
If you have ever wondered if you can switch between regular and synthetic motor oil, you need to consider what type of oil works best for your engine.
P2568 OBD-II Trouble Code: Direct O-Zone Reduction Catalyst Temperature Sensor Circuit Range/Performance
P2568 P2568 code definition Direct O-zone Reduction Catalyst Temperature Sensor Circuit Range/Performance What the P2568 code means P2568 is an OBD-II generic code that the engine control module (ECM) has detected the engine o-zone reduction catalyst temperature sensor to be...

Why did my car leak oil? 2004 Cadillac DeVille

Hey there. You must have gotten the oil filter double gasket from the old gasket O-ring left on and put a new filter on, and it would not let the new filter seal. Remove the oil filter and check for...

After a radiator change, My car is shaking and emitting black smoke. What could be the cause? 2000 Volvo S80

Hello, your symptoms suggest a coolant temperature sensor failure (https://www.yourmechanic.com/question/engine-temp-reads-low-by-jamie), or wiring problem (cut wires or other "open circuit" issues). Changing the radiator may have caused the sensor to be bumped, or the wiring for this sensor to be damaged....

P1127 ETCS Actuator Power Source Circuit Malfunction

Hi there. There are probably more blown fuses than just the two you mentioned. That particular code generally means that the throttle motor circuit has no power available. I suggest checking all the fuses and replacing as necessary; this includes...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com