P0769 OBD-II Trouble Code: Shift Solenoid D Intermittent

Our certified mechanics come to you · Get a fair and transparent estimate upfront

EXCELLENT RATING ON

Cost of diagnosing the P0769 code

P0769 is a diagnostic trouble code (DTC) for "Shift Solenoid D Intermittent". This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic for $154.99 . Once we are able to diagnose the problem, you will be provided with an upfront quote for the recommended fix and receive $50.0 off as a credit towards the repair. All our repairs are backed by our 12-month / 12,000-mile warranty.

Cars Estimate* Credit towards follow-up repair Earliest Availability
Ford $154.99 $50.0
Toyota $154.99 $50.0
BMW $164.99 $50.0

*Estimates may vary by market

SCHEDULE P0769 DIAGNOSTIC Get a fair and transparent estimate upfront

P0769 code definition

When an abnormal voltage reading is detected by the PCM in the shift solenoid D, the P0769 code will be stored.

What the P0769 code means

Shift solenoids are part of the system that manages the fluid transfer between circuits, and allows a vehicle to decelerate and accelerate. These solenoids are important for achieving the commanded vehicle speed, and for actuating optimal engine performance. If a solenoid (in this case, shift solenoid D) is not performing correctly, the PCM will store the P0769 code.

What causes the P0769 code?

The most commonly observed causes of the P0769 code include:

  • Faulty shift solenoid
  • Internal failures in the transmission
  • Low transmission fluid
  • Dirty or contaminated transmission fluid
  • Blocked transmission fluid passages
  • Open or short shift solenoid D valve harness
  • Poor electrical connection within the solenoid D circuit
  • A faulty PCM or TCM, in very rare cases

What are the symptoms of the P0769 code?

In addition to the illuminated Check Engine lamp, some vehicle owners may observe:

  • Decreased fuel efficiency.
  • Harsh shifting.
  • Transmission slippage, or an overheating transmission.
  • Failure to shift into or out of a particular gear.

However, some vehicle owners may observe no symptoms at all.

How does a mechanic diagnose the P0769 code?

After verifying the code with an OBD-II scanner, the mechanic should begin by inspecting the transmission fluid. If the fluid is too low, it needs to be refilled; if the fluid appears dirty, or smells burnt, the system needs to be flushed and refilled with clean fluid. After this, and any other potential repair is complete, the P0769 code should be cleared from the system, and a retest should be performed. If the code does not reappear, the mechanic has successfully diagnosed the issue.

Should the code reappear, the next step is to inspect all electrical components, and replace or repair any that are damaged, loose, corroded, or otherwise inoperable. Inspections of the hydraulic pressure, the shift solenoid function, and all related circuits will be performed next, until the improperly functioning component is found.

Common mistakes when diagnosing the P0769 code

The most common mistake made when diagnosing the P0769 code is replacing the shift solenoid itself, rather than first checking the circuit components for electrical issues.

How serious is the P0769 code?

Even when symptoms are not present, if the P0769 code is being detected, it should be dealt with immediately. This code indicates an issue that directly affects the operation of the vehicle, and could mean that the vehicle may not be operation for much longer, or that more expensive repairs will be needed down the road.

What repairs can fix the P0769 code?

Addressing the P0796 code may include:

  • Replacing faulty shift solenoid
  • Repairing internal failures in the transmission
  • Refilling low, dirty, or contaminated transmission fluid
  • Clearing blocked transmission fluid passages
  • Replacing open or short shift solenoid D valve harness
  • Repairing poor electrical connection within the solenoid D circuit
  • Replacing faulty PCM or TCM, in very rare cases

Need help with a P0769 code?

YourMechanic offers certified mobile mechanics who will come to your home or office to diagnose and repair your vehicle. Get a quote and book an appointment online or speak to a service advisor at 1-800-701-6230.

Check Engine Light
trouble codes
P0769

No more waiting rooms! Our mechanics will come to you to diagnose and fix the P0769 code.

SCHEDULE P0769 DIAGNOSTIC
Get a $50 credit for the follow-up repair

Recent Check Engine Light is on Inspection reviews

Excellent Rating

(8600)

Rating Summary
8017
273
65
46
199
8017
273
65
46
199
 at YourMechanic

Brandon

9 years of experience
133 reviews
Brandon
9 years of experience
Ford Escort L4-2.0L - Check Engine Light is on - Nashville, Tennessee
Brandon showed up ahead of schedule, was very personable and diagnosed my problems. He also scheduled my next appointments which will be with him.
 at YourMechanic

William

23 years of experience
33 reviews
William
23 years of experience
Lexus IS250 V6-2.5L - Check Engine Light is on - Mableton, Georgia
Arrived early which was great. William was courteous, and attentive to the issue. Even though it took several attempts I'm so happy he was determined to fix it and he did!
 at YourMechanic

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Plymouth Grand Voyager - Check Engine Light is on - Lawrenceville, Georgia
Mr. Dan Barber was quite patient, courteous and quite knowledgeable. From my observation, Mr. Barber appears to be quite professional.
 at YourMechanic

Christopher

9 years of experience
120 reviews
Christopher
9 years of experience
Ford Fiesta L4-1.6L - Check Engine Light is on - Smyrna, Georgia
Chris communicated with us each step of the way up until his arrival. He listened well, was knowledgeable, and was prepared. He took the time to diagnose the problem, explained the what, why and how and provided a solution. I would definitely recommend him and will use him again.


More related articles

Related questions

Check engine light came on while driving
The Check Engine Light is an indicator that something is affecting your emissions in a negative way. This can be as simple as a loose gas cap (https://www.yourmechanic.com/services/gas-cap-replacement), to a misfire (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) and many things contribute to the overall emissions...
P2006 code - intake runner stuck closed
When you got a 1.6 volt reading from the test you did, this is not a normal test done for this code. Only a proper pinpoint done by a manufacturer approved test procedure would be able to diagnose the system...
o2 sensor reads 0 volts.
You may need to look at the code P0122 (https://www.yourmechanic.com/article/p0122-obd-ii-trouble-code-throttle-pedal-position-sensor-switch-tps-a-circuit-low-input-by-jay-safford) since it pertains to the throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) and this can affect all the drive symptoms you are having. The O2 sensor readings seem to be normal and you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com