This type of low pitched noise tends to be caused by wheel bearings that are just beginning to wear out, or a CV joint that might be losing lubrication as well. It could also indicate a problem with tie rods...
If you have clean brake fluid (https://www.yourmechanic.com/services/brake-fluid-is-black-or-brown-inspection) at the wheels after following the proper bleed sequence, I would try bench bleeding the master cylinder one more time and bleeding at the wheels afterwards. If you still don't have a proper...
Hi there. The Ford engine will not bolt up to your Mazda transmission, however, you can purchase a conversion plate that would allow the engine to bolt up to the transmission. If you do this, you will need to get...
