Steering Shaft U Joint Replacement at your home or office.

Our certified mechanics come to you · Backed by our 12-month, 12,000-mile warranty · Get a fair and transparent estimate upfront


Steering Shaft U Joint Replacement Service

What is the Steering Shaft U Joint all about?

Vehicles are equipped with suspension systems to allow movement vertically when going over bumps to enhance comfort. When that vertical motion occurs, it is impossible to have a part running horizontally stay in the same position, otherwise it will bind. That is the purpose of the universal joint in the steering shaft. The steering shaft is a rod that connects the upper steering column to the steering gear or rack and pinion, and needs to be able to flex and rotate at the same time. The universal joint allows that motion to occur. The u-joint utilizes pin bearings in cups at four mounting points on the joint for smooth operation. When those bearings begin to wear, or if the joint lacks lubrication, it may begin to wear out and clunk, or bind.

Keep in mind:

  • The intermediate shaft, or steering shaft, is the lower part of your steering column.
  • While the steering shaft u joint does not require maintenance, it should be inspected as part of a steering and suspension checkup or wheel alignment.
  • The steering shaft u joint is typically replaced as part of the whole intermediate shaft.

Our recommendation:

The steering shaft u joint does not require maintenance or lubrication, and can often last the lifetime of the vehicle. It can be dangerous to operate your vehicle with a bad steering shaft u joint. If you suspect a problem with the steering shaft u joint or experience related symptoms, have one of our expert mechanics inspect and replace the steering shaft.

What common symptoms indicate you may need to replace the Steering Shaft U Joint?

  • Clunking noise when turning the steering wheel either way.
  • Steering wheel binds when turning and is hard to return to center position.
  • Squeaking or rubbing noise under the dash when turning.

How important is this service?

Your steering system is vital to controlled operation on the roadways. If the steering shaft u joint is binding, you may not be able to accurately control the steering wheel when turning or when turning the steering wheel back to the center position. If the shaft is clunking, it is an early indication of an impending serious problem. Have a faulty steering shaft replaced immediately.

Fast and easy Steering Shaft U Joint Replacement service at your home or office.


Recent articles & questions

A Buyer’s Guide to the 2012 Mercedes-Benz SLK
It’s It’s not a sedan and it’s not quite a sports car, but chances are that brand-loyal fans desiring that luxury-class hard-top convertible with some oomph under the hood won’t care. The SLK roadster boasts three attractive engine options, and...
How to Register a Car in Georgia
All All vehicles must be registered through Georgia’s Motor Vehicle Division (MVD). If you have just moved to the state, you have 30 days from the time you become a resident to make sure your vehicle is registered. Before registering...
How to Replace a Hole in a Speaker
If If you want a good sound system, you need a good set of speakers (https://www.yourmechanic.com/article/4-essential-things-to-know-about-your-car-s-stereo-and-speakers). Speakers are basically air pistons that move back and forth creating different sound frequencies. Alternating current is fed to the speaker voice coil by...

Driving then all of a sudden loose speed and truck won't accelerate. Power is fine. Engine shakes a little. Gas pedal feels loose

Hello. If the speedometer is not working, then the first thing I would check is the vehicle speed sensor (https://www.yourmechanic.com/services/speed-sensor-replacement). If the speed sensor is bad then the computer will not shift the vehicle which will cause this. If the...

Coolant leaking from somewhere. No clue where from.

Hello. Locating a coolant leak can be a challenge. The coolant system operates under a low pressure. When you need to locate a leak, you must create that pressure. There is a tool called a coolant pressure tester that can...

How many litres of oil will new gearbox will contain

Hello. Your Murano will need 10.2 liters of fluid if it is dry. When the gearbox is new it should be empty and need a dry fill. Make sure that you use genuine fluid from Nissan.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com