Power Steering Pressure Hose Replacement at your home or office in Rio Linda.

Our mobile technicians offer services 7 days a week. Upfront and transparent pricing.

Get an upfront price

Service Area

Average rating from customers who
received a Power Steering Pressure Hose Replacement.
Learn More

$123.33 - $956.03

Price range for all vehicles


YourMechanic Benefits

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Average rating from customers who
received a Power Steering Pressure Hose Replacement.
Learn More



Recent Power Steering Pressure Hose Replacement reviews in Rio Linda

Excellent Rating


YourMechanic Power Steering Pressure Hose Replacement Service

Average Rating

4.9/5

Number of Reviews

538

Rating Summary
507
16
3
4
8
507
16
3
4
8

Jeffrey

25 years of experience
843 reviews
Jeffrey
25 years of experience
Second time using Jeff, never seems to fail me. Best I seen thus far!!!
As always, he worked extremely hard to take care of us in good time and with utmost excellence.

Clifton

28 years of experience
197 reviews
Clifton
28 years of experience
I must say I was extremely impressed with the service provided by Clifton. I had an issue with my Lincoln Navigator and he was able to assess the issue within seconds. He is very professional and knowledgeable. I would recommend Yourmechanic to anyone who prefer convenience and great service. I must say I was skeptical at first because never heard about this type of service before but will definitely use in the future if needs be and recommend to friends and family. I'm sure there are other great mechanics but Clifton was/is a great representative and great worker.

Kiri

18 years of experience
372 reviews
Kiri
18 years of experience
He did a great job on my car, i will definitely use him again.

Bryan

20 years of experience
45 reviews
Bryan
20 years of experience
Bryan was amazing, the service was fast, he recommended that I get a another power steering pump. I will definitely ask for Brian again to install my new pump.

Tomas

11 years of experience
226 reviews
Tomas
11 years of experience
Best, Professional, Did The job With Ease, There half hour earlier than appointment & fast. You will be satisfied with his services

Rodney

34 years of experience
386 reviews
Rodney
34 years of experience
He was very professional and knowledgeable. I highly recommend.

Aaron

27 years of experience
89 reviews
Aaron
27 years of experience
Aaron did a great job, explained all that he was doing, and was very friendly too. I will use him again next time I need a mechanic.

Jasmine

21 years of experience
93 reviews
Jasmine
21 years of experience
He's a great mechanic. This is the second time we've used him and have been happy both times.

Brandon

16 years of experience
318 reviews
Brandon
16 years of experience
Brandon is very knowledgeable, meticulous and courteous mechanic. I would like to have his help on other future jobs.

Richard

19 years of experience
223 reviews
Richard
19 years of experience
Richard was awesome! Came by to fix a power steering fluid leak and replaced it in a very timely manner. Genuinely good guy!


How much does Power Steering Pressure Hose Replacement cost in Rio Linda?

It depends on the type of car you drive and the auto repair shop you go to in Rio Linda. Our mechanics in Rio Linda are mobile, which means they don't have the overhead that repair shops have. They provide you convenience by coming to your home or office in Rio Linda.

Cars Estimate Parts Cost Labor Cost Savings Average Dealer Price
2014 Chevrolet Volt $188 $108.37 $79.99 12% $215.87
2005 Ford E-350 Super Duty $157 $53.30 $103.98 18% $193.05
2008 Ford E-250 $156 $51.55 $103.98 18% $191.30
2012 BMW 750Li xDrive $1258 $441.94 $815.89 18% $1538.44
2007 Cadillac DTS $345 $200.75 $143.98 12% $394.25
2011 Audi S5 $504 $400.33 $103.98 6% $540.08

Fast and easy service at your home or office

GET A QUOTE FOR YOUR CAR

Backed by 12-month, 12.000-mile guarantee


Power Steering Pressure Hose Replacement Service

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

GET A QUOTE FOR YOUR CAR

Backed by 12-month, 12.000-mile guarantee


How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1-800-701-6230 · hi@yourmechanic.com