Best Prices for Parking brake won't engage Inspection

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)


Parking brake won't engage Inspection Service

Engaging your parking brake ensures that your car doesn’t roll when you park on a hill. This is important in a wide variety of situations, whether you’re parking at home and your driveway is angled, or you’re backing down a boat ramp to unload in the lake. If your parking brake won’t engage, then you’re relying solely on the transmission’s park setting to hold the vehicle in place, which is never a good thing. It could slip, and it could also cause damage to the transmission.

How this system works:

Most parking brakes are relatively simple affairs – really nothing more than a cable that attaches to the handle that sits between your front seats (or the parking brake pedal under the dash in some cars). Pulling the handle pulls the cable, which engages the parking brake assembly and pushes a pair of brake shoes into contact with the inside of the drum.

However, despite that simplicity, there are several things that could go wrong with your parking brake. The most common issue is simply that you need to adjust your brake shoes. However, there could be a problem with the cable (corrosion or wear, for instance), or there could be a problem with the handle itself, although this is rare.

Common reasons for this to happen:

  • Need to Adjust Brake Shoes: The single most common reason your parking brake won’t engage is a need to adjust the brake shoes. This requires removing the rear wheels, removing the drum, and then adjusting the wheel to spread the shoes apart. Both sides should be adjusted.

  • Cable Is Detached: Another potential reason here is that the cable may have come loose from one or both sides. The cable must attach to both rear brakes for your parking brake to work (if it attaches to just one side, the brake will engage but feel loose, and the car will roll on a hill).

  • Cable Is Loose at the Handle: A much less common problem is that the nut where the cable attaches under the handle is loose. If this happens, there will be slack in the cable, and pulling the handle will not engage the parking brake. This is most common after inexpert parking brake repairs.

  • Rusted Bell Crank: The bell crank is really nothing more than a lever that sits near the front of the parking brake assembly. These are prone to rusting, particularly if you don’t use your parking brake very often. If this is the case, your parking brake will not engage.

What to expect:

One of our experienced mobile mechanics will come to your home or office and inspect the entire parking brake system, from the handle to the bell crank, the cabling and the attachment points at the rear. The mechanic will also provide you with a full report that details the scope and cost of any necessary parts and repairs.

How it's done:

The mechanic will inspect all aspects of your parking brake, beginning with the handle or pedal in the cabin. The mechanic will also inspect the cables, the shoe condition and adjustment and other aspects of your parking brake system. It may be necessary to remove one or both rear wheels, as well as the brake drums (if your car has drum brakes). If your car has disc brakes, the caliper and rotor may need to be removed to inspect the parking brake shoes, which are located inside the built-in drum on the rotor itself.

How important is this service?

If your parking brake will not engage, it will not prevent you from driving, but it does make parking on an incline risky. It’s possible that the transmission will slip out of park, and the vehicle will roll down the slope. One of our mechanics can fully assess your parking brake and advise you on what is needed to repair it.


Recent Parking brake won't engage Inspection reviews

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

John

37 years of experience
565 reviews
John
37 years of experience
Buick Electra V6-3.8L - Parking brake won't engage - Roseville, California
John is experienced with older cars. Great job and explained what the problem was and what could be done about it.

Lee

35 years of experience
66 reviews
Lee
35 years of experience
Toyota Camry L4-2.2L - Parking brake won't engage - Marietta, Georgia
Awesomeness! Resolved my issue within 10 minutes! Very informative, very professional! On time arrival as well. Thank you for your superb services!

Travis

11 years of experience
296 reviews
Travis
11 years of experience
Ford Crown Victoria V8-4.6L - Parking brake won't engage Inspection - Houston, Texas
Very professional, punctual, and commutative. Excellent mechanic.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Ram 1500 V8-5.7L - Parking brake won't engage Inspection - Norfolk, Virginia
So easy simple and affordable! Found my new mechanic!

Recent articles & questions

Symptoms of a Bad or Failing Battery Cable
If you experience problems starting and powering the car or find corrosion on the battery terminals, you may need to replace a battery cable.
How Long Does a Universal Joint (U-Joint) Last?
For For most rear wheel drive cars, a driveshaft is needed to ensure that the tires turn as they should. The driveshaft works by taking the power from the transmission and transferring it to the wheels of the vehicle. In...
How to Read a VIN (Vehicle Identification Number)
A car VIN (Vehicle Identification Number) contains unique information about where the car was made and can be found in your car or online.

Check fuel fill inlet

Hello. The "Check fuel inlet" message comes on when the computer detects that there is an issue with the vehicle's EVAP system. The EVAP system is an emissions system that collects fumes from the gas tank and recirculates them into...

Coolant coming out of my air intake

I think the most likely cause of this issue would be a blown intake manifold gasket. I would recommend having your engine smoke tested to determine if any smoke comes out of the place you believe the coolant is leaking....

What would cause my car to idle hunt..Rev up and down continusly in neutral

Hi There, It sounds like you may have a dirty or failing idle air control valve causing your engine idle to fluctuate and eventually stall. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is a small valve on the engine's intake system...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

+1 (855) 347-2779 · hi@yourmechanic.com