Best Prices for Grinding noise when braking Inspection

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(93)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(93)


Grinding noise when braking Inspection Service

Today’s drivers are pretty comfortable with modern braking technologies. We’ve become so used to the advanced technology that makes slowing and stopping our cars possible that we take it for granted – at least until something goes wrong. Disc brakes are subject to a number of problems, as well as wear and tear, and if you’re hearing a grinding noise when braking, then you need to take action immediately.

How this system works:

The modern disc brake system is actually relatively simple to understand, although it does require a significant network of components in order to operate. For the purposes of this discussion, we’ll limit the scope to just the components mounted around the wheel hub – the ones that might be responsible for the grinding sound you’re hearing.

There are several components here – brake lines deliver pressurized fluid to the brake caliper, which holds and actuates the brake pads. Brake pads are made with a metal backing plate and a high-friction material on the other side. This material is designed to press up against the surface of the rotor, slowing and stopping the car as the caliper squeezes the rotor between the pads.

Over time, pads wear down. It’s a simple fact of life. You’ll need to replace them periodically, although the frequency of replacement will vary depending on your driving habits, local geography (hills, mountains, etc.) and other factors.

Common reasons for this to happen:

  • Excessive Pad Wear: The single most common reason to hear a grinding noise when braking is excessive pad wear. Once the material has been worn off the backing plate, you’ll be experiencing “metal on metal”. Part of the brake caliper could also be touching the rotor at this point. Both cause extensive damage – the backing plate will eat into the rotor, causing grooves and serious damage. The caliper will do the same thing, but the rotor will also eat into the metal of the caliper, potentially causing the need for replacement.

  • Foreign Debris Lodged in Brakes: It’s also possible to have foreign debris lodged in the brake system. The most common example would be a rock or piece of gravel caught in the caliper and riding between the caliper and the rotor. This can cause damage to the rotor as well, and you’ll generally hear the sound even when you’re not pressing the brake pedal.

  • Low Quality Brake Pads: If you’ve had your brake pads replaced recently and are now hearing a grinding sound, it could be because low quality pads were used. Semi-metallic pads can sometimes contain hard chunks of metal that will eat into the rotors and cause a grinding sound when applied (always use OEM quality brake pads).

  • Wear Indicator Contacting Rotor: If the sound you’re hearing is more of a squealing than a grinding, chances are good that it is the wear indicator on your pads connecting with the rotor. This comes preinstalled on many brake pads and is designed to warn you that the pad material is getting low and you’ll need to replace them soon.

What to expect:

One of our professional mobile mechanics will visit your home or office to inspect the brakes and determine if the problem is due to wear and tear, or if there is something deeper going wrong, such as the rotor being grooved by the caliper. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your brake pads, the rotors, calipers, and the brake lines feeding the calipers. It may be necessary to remove one or both front wheels for a visual inspection. It may also be necessary to test drive the vehicle if the source of the problem is not immediately apparent in order for the mechanic to verify the grinding noise.

How important is this service?

If you’re hearing a grinding sound when applying the brakes, there is definitely something that needs to be addressed. It might be something as simple as the wear indicators on the pads connecting with the rotor, or it could be something more serious. If you have worn completely through the pads and your brakes are now “metal on metal”, it’s essential to your safety to replace your pads and have the rotors resurfaced now. In some cases, the damage to the rotor may be severe enough to require replacement.


Recent Grinding noise when braking Inspection reviews

Excellent Rating

(93)

Rating Summary
88
3
0
0
2
88
3
0
0
2

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Mercury Mariner L4-2.5L Hybrid - Grinding noise when braking - Austin, Texas
He was on time, very courteous and walked me through what was wrong with my car step by step and how urgently I needed to fix each thing and what would need to get replaced down the line. Incredibly helpful and if I was still in Texas I’d go back in a heartbeat!

Marco

30 years of experience
329 reviews
Marco
30 years of experience
Volkswagen Jetta L5-2.5L - Grinding noise when braking - Corona, California
Marco was reliable and experienced. Found the exact source of the issue no problem and corrected the mistake. He also, gave me answers to questions I had for a few self repairs I have planned.

Richard

20 years of experience
97 reviews
Richard
20 years of experience
Dodge Grand Caravan V6-3.6L - Grinding noise when braking - Fayetteville, North Carolina
Richard came by to fix my vehicle earlier today. He was punctual and very polite, pleasant and proffesional. He was very attentive to my concerns and did not give me a sense that he was rushing at all. He took time to explain everything that he was doing which put me at ease and gave me the confidence and trust that he was really fixing my vehicle to a high standard. I am really please that he was my mechanic, I would have no hesitation to book an appointment with him in the future at all. You guys are in good hands! Thank you once again for correcting the horrendous, subpar work that the previous person carried out and thank you for giving me the peace of mind that my vehicle is road safe.

Miguel

22 years of experience
273 reviews
Miguel
22 years of experience
Mercedes-Benz CLK320 V6-3.2L - Grinding noise when braking Inspection - Fort Lee, New Jersey
Miguel gave me an assessment on a used car I recently bought. He was very thorough, honest about the vehicle's condition and suggested recommendations about the issue w/ my car's brakes. A++!

Recent articles & questions

P2033 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 trouble code definition Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2 What the P2033 code means P2033 is an...
Maine Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Maine. Speed limits in Maine 75 mph: I-95 between Old Town and Houlton 70 mph: most of the...
The Guide To Colored Curb Zones in Iowa
Iowa Iowa parking laws: understanding the basics In Iowa, there are a number of parking laws regarding different types of parking and standing, as well as those laws specific to certain locations. Local towns and cities will often adopt the...

Car accelarates to 3000 rpm in park or neutral.

The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) (TPS) is most likely failing. Air leaks in the intake can also generate a high idle, but not usually this high. If you need to have this checked, have a local mechanic, like one from...

Vehicle won't shift into 4th. High rpm at 60 and won't shift but get a pcv code

Too much air flowing into the intake causes the engine to lean out, as a result of too much air in relation to the fuel and misfire. At an idle, the PCV valve restricts air flow, to reduce this problem....

I installed a brand new alternator and now the belt won't spin when it did before why is this

If the engine is running, but the belt is not turning, the drive belt tension is inadequate, the belt routing is incorrect and/or other rotating elements (pulleys, etc.) in the serpentine belt circuit are seized. If you request serpentine belt...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

+1 (855) 347-2779 · hi@yourmechanic.com