Brake Pad Replacement at your home or office in Valley Stream.

Our mobile technicians offer services 7 days a week. Upfront and transparent pricing.

Get an upfront price

Average rating from customers who
received a Brake Pads Replacement.
Learn More

$112.98 - $434.14

Price range for all vehicles


YourMechanic Benefits

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Average rating from customers who
received a Brake Pads Replacement.
Learn More



Recent Brake Pad Replacement reviews in Valley Stream

Excellent Rating


YourMechanic Brake Pad Replacement Service

Average Rating

4.9/5

Number of Reviews

9,468

Rating Summary
9,009
299
59
30
71
9,009
299
59
30
71
Brian

Brian

19 years of experience
105 reviews
Brian
19 years of experience
Brian was on time and seemed to get the work done. I do not know to about brake pads, but let's see how my car feels in a few weeks.
Brian is a bit of quirky guy, but I found him to be credible and helpful. Hoping I have no problems in the future, but if I do, I would hire Brian again.
Brandon

Brandon

17 years of experience
570 reviews
Brandon
17 years of experience
Excellent service. I will continually request Brandon to work on my vehicle. his knowledge is amazing and his skill is just as great. he performed all my maintenance and went above and beyond the normal duties. I will definitely recommend him again.
Had my car running smoothly once my brakes were fixed. Thank you again for your service
Damian

Damian

8 years of experience
255 reviews
Damian
8 years of experience
A+
Dependable and her knowledgeable.
Wesley

Wesley

13 years of experience
277 reviews
Wesley
13 years of experience
Wesley was on time and completed the job fast. He's very competent and friendly.
Dante

Dante

28 years of experience
98 reviews
Dante
28 years of experience
Alfred

Alfred

10 years of experience
218 reviews
Alfred
10 years of experience
Alfred arrived timely to replace our car’s old brake pads and rusty rotors. Drive tested the car and recommended to replace the rear caliper later when vibration happens and is noticed while driving and pressing the brake. He also recommended that brake fluids should be flushed out.
James

James

17 years of experience
66 reviews
James
17 years of experience
He did a great job! Would definitely use him again!!
Xavier

Xavier

13 years of experience
101 reviews
Xavier
13 years of experience
Xaviers very good at his work!!
Patrick

Patrick

30 years of experience
865 reviews
Patrick
30 years of experience
Patrick was very friendly and professional. He advised me on a number of questions I had and suggested that some of the services I requested were unnecessary. Subsequently, the actual cost was much less than the provided quote! Will definitely be recommending this service, and Patrick specifically, to others. I'll also be using Your Mechanic again.
Matthew

Matthew

9 years of experience
183 reviews
Matthew
9 years of experience
Courteous did the job and even offered to take and throw the old parts away.


How much does Brake Pad Replacement cost in Valley Stream?

It depends on the type of car you drive and the auto repair shop you go to in Valley Stream. Our mechanics in Valley Stream are mobile, which means they don't have the overhead that repair shops have. They provide you convenience by coming to your home or office in Valley Stream.

Cars Estimate Parts Cost Labor Cost Savings Average Dealer Price
2005 Honda Civic $135 $55.19 $79.99 16% $162.69
2009 Volkswagen CC $167 $71.33 $95.98 16% $200.33
2005 Ford Explorer $159 $55.19 $103.98 18% $194.94
2011 Audi Q5 $185 $104.62 $79.99 12% $212.12
2005 Audi A8 Quattro $242 $137.76 $103.98 12% $277.51
2009 Audi S6 $218 $137.76 $79.99 11% $245.26

Fast and easy service at your home or office

GET A QUOTE FOR YOUR CAR

Backed by 12-month, 12.000-mile guarantee


Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

GET A QUOTE FOR YOUR CAR

Backed by 12-month, 12.000-mile guarantee


How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1-800-701-6230 · hi@yourmechanic.com