Brake Pad Replacement at your home or office in Brisbane.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(13,543)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(13,543)


Recent Brake Pad Replacement reviews in Brisbane

Excellent Rating

(13,543)

Rating Summary
12,950
376
79
37
101
12,950
376
79
37
101

Hector

14 years of experience
60 reviews
Hector
14 years of experience
Hector definitely exceeded our expectations! ON TIME. GREAT PERSONALITY. KNOWLEDGEABLE. Showed us what condition our brakes were in, saving us money right off the bat. Hope to book him again!
Hector was on time, easy to get along with, and has a positive attitude. Very knowledgeable and took his time to show me where I should be attentive to future maintenance issues.

Chris

22 years of experience
2068 reviews
Chris
22 years of experience
See below review - Booked Chris again due to his expertise.
Very professional, did the job well & fast.

Abdul

11 years of experience
419 reviews
Abdul
11 years of experience
Abdul was on time and completed all the requested services very quickly.

Andrew

15 years of experience
429 reviews
Andrew
15 years of experience
Andrew replaced my cars brake pads in a neighborhood curb spot!! Valuable mechanic at an unbeatable price- Thank you!

Brian

18 years of experience
109 reviews
Brian
18 years of experience
Great

Rusty

23 years of experience
462 reviews
Rusty
23 years of experience
He replaced the rear brake pads and made sure everything was working before he left. Will book him again when I need car services or repairs.

Tinashe

13 years of experience
517 reviews
Tinashe
13 years of experience
Very professional, knowledgeable about vehicle repairs, and punctualable.

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Great service!

Jacob

12 years of experience
329 reviews
Jacob
12 years of experience
Amazing work. Professional and on time!

Tien

23 years of experience
903 reviews
Tien
23 years of experience
I have become a fan of your mechanic site and will let my friends know about this. Thanks


How much does Brake Pad Replacement cost in Brisbane?

It depends on the type of car you drive and the auto repair shop you go to in Brisbane. Our mechanics in Brisbane are mobile, which means they don't have the overhead that repair shops have. They provide you convenience by coming to your home or office in Brisbane.

Cars Estimate Parts Cost Labor Cost Savings Average Dealer Price
2010 Chevrolet Suburban 2500 $167 $71.08 $95.98 16% $200.08
2014 Dodge Charger $167 $71.08 $95.98 16% $200.08
2010 Kia Sedona $151 $71.08 $79.99 15% $178.58
2006 Mercedes-Benz B200 $128 $47.75 $79.99 17% $155.25
2010 Mercedes-Benz E350 $164 $83.71 $79.99 14% $191.21
2008 Ford Mustang $151 $71.08 $79.99 15% $178.58

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Recent articles & questions

Is It Safe to Drive With the DPF Light On?
Diesel particulate filters are intended to reduce soot emissions by as much as 80%. When the filter fails, the DPF (diesel particulate filter)...
P0064 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2, Sensor 3)
P0064 P0064 trouble code definition Indicates that there is an abnormally high voltage or resistance present in the heater control circuit of oxygen sensor (bank 2 sensor 3). The oxygen sensor measurements only become accurate when the sensor reaches a...
A Buyer’s Guide to the 2012 Volkswagen Touareg TDI
The The 2012 Volkswagen Touareg TDI brings diesel to the family in a big way. This crossover SUV delivers seamless performance in a vehicle that obviously designed for the open road rather than any trails or other types of off-road...

I have a 03' impala it stopped on me a week ago I was told by an8mechanic that it was thw staryer since i had to start it twice in

While I don't wish to cast stones, it doesn't sound like you have been getting very good advice. A car that doesn't start at all is usually the easiest kind of problem to diagnose. It's the cars that only fail...

Nothing seems wrong and the motor is burning oil

The oil consumption on most engines is supposed to be less than 1 quart per 1,000 miles. You state you are using 3 quarts every 2,000 miles. The first thing would be to have an oil consumption test that would...

Rattle sound when going over bumps 2011 Chevrolet Malibu

Hello - I would try to replicate the noise with a linebacker friend or two throwing their weight on one front fender at a time. Your parts replacements thus far are the logical ones, and the ready-mounts (assuming they had...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com