Backpressure Transducer Replacement at your home or office.

Our certified mechanics come to you · Backed by our 12-month, 12,000-mile warranty · Get a fair and transparent estimate upfront


Backpressure Transducer Replacement Service

What is the Backpressure Transducer all about?

As your engine operates, it creates exhaust fumes – a mixture of used gases and other elements. Most of these are burned up by the catalytic converter in the exhaust system, but some are not. The gases are recirculated through the engine to be burned again. This not only reduces emissions, but helps to provide better fuel economy (by ensuring all the power in gasoline vapors is utilized). There needs to be a way to recirculate those gases into the manifold. That’s the job of the backpressure transducer. You might be more familiar with this component as the EGR valve (exhaust gas recirculation valve).

There are two types of backpressure transducers used on today’s cars. The most common is the positive backpressure type, while the less common is the negative backpressure type. As you might imagine, they work in opposite ways, but both rely on the backpressure of the exhaust system.

Over time and through normal use, your backpressure transducer is exposed to not only high heat, but lots of exhaust gas, which carries carbon. Carbon builds up within the valve itself, restricting airflow through the system. In some cases, the carbon can be cleaned by a professional, but in others, the buildup is so severe that the entire valve must be replaced.

Keep in mind:

  • The backpressure transducer is not inspected during routine maintenance service.
  • A failed or failing backpressure transducer can cause a number of different symptoms, and must be diagnosed by a professional mechanic.

Our recommendation:

Over time, carbon will build up within the backpressure transducer, limiting its effectiveness and the vehicle's operation as a result. Eventually, the backpressure transducer will need to be replaced. Have it inspected by one of our expert mechanics who will determine if the port simply needs to be cleaned, or if replacement is required. You’ll also need to have it replaced to pass your emissions test.

What common symptoms indicate you may need to replace the Backpressure Transducer?

  • Check Engine light is on
  • Rough idle
  • Spitting and sputtering while driving

How important is this service?

Without a working backpressure transducer, your EGR (exhaust gas recirculation) system will not function properly. This will have a negative effect on engine operation, as well as your emissions. If you suspect there’s a problem with your EGR valve, have it inspected and repaired as soon as possible.

Fast and easy Backpressure Transducer Replacement service at your home or office.


Recent articles & questions

What Is Front-Wheel Drive?
If a vehicle is of the front-wheel drive variety, then all of the power made by the engine gets to the ground via the two front wheels. This arrangement is extremely popular in modern vehicles for a number...
Headlight Use Laws for All 50 States
Every state has different rules and regulations on headlight use. Headlight laws vary between states, so it's a good idea to familiarize yourself.
How to Replace an Ignition Coil
Your spark plugs work with the ignition coil to receive signals from your vehicle’s computer. A bad coil can cause driveability issues like stalling.

knock sensor

Hello. To understand what is going on, lets discuss these two components and how they work. Harmonic balancers are essentially vibration dampeners in the engine that counteract the torque caused vibrations coming from the crankshaft. Every time the combustion cycle...

I accidentally put diesel in my car and I want to know that it'll be salvageable

The fuel tank will have to be thoroughly drained and refilled with fresh gas. The Mechanic would possible try to purge the fuel rail once fresh gas is in the tank, however, it is possible that the remaining diesel fuel...

My car is shaking from the passenger side when idle in D mode and the ac turns on

A more likely explanation is the engine is not "quickly" responding to the increased load placed on it when the a/c turns on, although apparently the idle does smooth out after a short delay. If the motor mounts were a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com