Q: Would a 2003 VW Jetta L4-2.0L need to be reprogrammed after getting a new battery installed? I was able to drive it?

Your car’s tire pressure monitoring system (TPMS) is designed to alert you when a tire’s pressure drops below a specific threshold. However, it might not mean that you have a flat. Here are a few things you need to know...

In order to make use of the convenience and enhance safety offered by the HandsFreeLink® (HFL) system in your car, you’ll need to first pair your phone. Thankfully, doing so is relatively straightforward. Here’s how to do it: Make sure...

The electronic power steering (EPS) Warning Light is located on the instrument panel. This light illuminates when the EPS is malfunctioning. When this light is lit, your steering may be a little heavier, and you should schedule an inspection as...

Hi there. You can be experiencing a weak AC compressor clutch engagement. I recommend having a certified mechanic sent by YourMechanic come take a closer look at the Air conditioner issues (www.yourmechanic.com/services/car-surges-when-air-conditioning-is-on-inspection vehicle is experiencing).

From your description I believe that there may be a problem in the rear differential of your vehicle. More specifically the pinion bearings. It sounds like they may have gone bad and this has caused excess movement in the drive...

This may be caused by many different things, however what is most common given this kind of symptom may be a dirty or failing idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). This is a unit that monitors air intake as it is...

Hello, thanks for writing in. In order to access the heater switch in the dash you will have to disassemble the vehicle's dashboard and center console. Once the appropriate interior trim components are removed the switch can be accessed. I...

Hi there: In many instances, the failure to blow hot air into the cab of your vehicle is caused by a malfunctioning heater core. If the air pressure is low however it could be a fault with the blower motor...

This is typically caused by a programming issue in the control module for the windows. Most of the time the module just needs to be reprogrammed by the dealer. In some cases this can be caused by debris if some...