Skip the auto shop - Our mechanics make house calls

Q: Wipers stop working at times - 1995 GMC G2500

asked by on

The windshield wipers stop working intermittently. When it happens, I would push them a bit and then they would work normally. How can I fix this?

Hello. This is caused by the wiper motor circuit board and cover. You should call a dealer to see if there is an active recall to repair this under a recall. If not, then I recommend replacing the entire motor and circuit board with cover.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!
  1. Home
  2. Questions
  3. Wipers stop working at times - 1995 GMC G2500

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Windshield wipers won't work.

The windshield wipers on this truck are controlled by the wiper switch with control module in the dash. The wiper module is making the noise you hear. You should first disconnect the wiper motor and see if noise goes away...

Q: loss of power when driving check engine light blinking at 30 mph just changed manifold intake have p0171 p0174codes

You are having problems with the fuel injection system poppet injectors not opening up or stuck open causing the misfire. You may have a bad fuel pressure regulator or you did not seal the fuel lines into the regulator good...

Q: High idle and poor gas on my 92 Chevy s10 4.3 . How can I fix this?

Hi Dominga. Thanks for submitting your question today. There could be several mechanical problems causing the high idle and excessive fuel consumption. Usually, it is something simple - like a loose vacuum line, dirty or damaged mass air flow sensor...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.