Q: Q: Window not rolling up

asked by on

My window won't roll up all the way.

Hi. There could be a couple of issues. The first thing to do is to check and see if the window will go up with a little help from you. If it doesn’t, the door panel will have to be removed and the window seal and regulator will have to be inspected for defects or issues. If the window can be helped up, then you most likely have a window motor or regulator issue. Again, the door panel would need to removed to determine the issue and make the repair. I recommend you contact a certified mechanic, such as one from YourMechanic, to inspect the window issue and repair any damaged parts.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Window not rolling up

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: hello Brandon my name is Marie,I have a 2005 pontiac bonniville gxp Im having crankshaft issues and oxygen sensors

Hi Marie: With regard to the code P1372 that was downloaded, there are many potential malfunctions that will cause P1372 to set in addition to the crankshaft position sensor itself being faulty. And, if the sensor itself is suspected as...

Q: Q: Car won't accelerate.

Based on the information you gave, it sounds like you may be low on transmission fluid, or maybe some other internal transmission problem. The first thing I would check is the transmission fluid level. This is done with the vehicle...

Q: Shifter boot loose

These interior components are wear items and replacements are usually available, even in aftermarket options. Have a mechanic, like our experts housed at YourMechanic, inspect your power window system to make sure that the mounting area for these parts are...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...