Q: why is shiter stuck in neutral but can be manually shifted by undoing the cable

asked by on July 16, 2017

I replaced transmission and was able to shift car into drive and neutral. now car shifter stuck in drive or neutral but can unhook cable and manually shift transmission.

My car has 160000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do you remove and reinstall head restraints?
Your car’s head restraints serve and important purpose in providing better comfort, but also in ensuring safety during an impact. Of course, there may come a time that you need to remove them (and reinstall them when you’re done). Here’s...
Turn signals not working
In my experience, I have come across a number of vehicles, such as with your Chevy Colorado, where multiple light bulbs have gone out at once. Or times where a bulb or two was previously out but only noticeable when...
The check engine light on for my 2005 Chevrolet Avalanche
Hey there, thanks for writing in about your 2005 Chevrolet Avalanche. If the gas cap was loose but then later taken care of, then the light may be due to another issue. You will need to have the Check Engine...
My instrument cluster is not working properly! Help!
Check that all fuses (https://www.yourmechanic.com/article/how-to-check-fuses-by-rocco-lovetere) are good. You can try removing the electrical connector on the back of the instrument cluster and plugging it back in. Odds are, the amplifier inside the gauge cluster has failed of has poor connection....
I have a stutter at idle
I would recommend checking the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). As you know this also contributes to the regulation of air flow into the throttle body. If this does not have the proper voltage going to it, this may also...
Humming noise coming from front end
If the tires are worn irregularly and/or have any internal damage (such as a belt separation) that will create a lot of noise of the type you are hearing. The other possibility is defective wheel bearings (quite common). I would...
The power door locks don't lock, either by the door switch or the key fob
It sounds like your remote may have lost synchronization. Most door lock systems use a "rolling code" where the digital code for the remote changes each time it is activated.The code for the controller changes along with it so they...
Stalling at low speeds and idle.
You may have a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. Since...
Hood sensor
Such a system is very limited in extent, and works using simple components. The Factory Service Manual for this vehicle will have a test protocol for the system. In addition, if the work was done at a Mercedes Benz dealership,...

Related articles

A Buyer’s Guide to the 2011 Mitsubishi Endeavor
The The 2011 Mitsubishi Endeavor is a crossover SUV that manages to provide decent comfort, power and performance into a single package. This also marked the final year of production for the SUV, as it was phased out due to...
A Buyer’s Guide to the 2012 Mitsubishi Galant
If If you’re in the market for a midsize sedan and want the best price possible, you may be thinking about visiting a Honda or Toyota dealership. Before you do, check out the 2012 Mitsubishi Galant. Key Features Considering how...
Mitsubishi Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Mitsubishi vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...