Q: Why can't Cruz control be used, when remedy computer not ready

Your description here sounds very concerning. The last thing you want to do is to start throwing parts, and money, at a car with only hope to eventually fix the problem. What I believe you are experiencing is actually a...

The idle control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is the most likely cause and is the most common of problems with the vehicle for a low idle problem. You may also need to clean the throttle body and its passages with the idle...

Either your battery is due for replacement (https://www.yourmechanic.com/services/battery-replacement) or you have a parasitic draw somewhere. A draw can be found by placing an ammeter in series with the negative battery cable. If excessive current draw is found, the cause of...

You are supposed to thread the hole out and get all the material from cutting cleaned out of the hole and engine cylinder. After it is cleaned then you should clean the threads with brake cleaner that will dry quickly....

Hello, thanks for writing in to YourMechanic. This behavior is a known problem with your Hyundai Elantra, and involves a transmission control solenoid that is malfunctioning. Check with your Hyundai dealer for Technical Service Bulletin (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-tsb-to-diagnose-and-repair-a-car-by-valerie-johnston) 286947. If you'd like...

From your explanation of the situation, it sounds to me like your vehicle may need a new clutch. If you are in gear and the vehicle struggles to move and the engine speed increases, the transmission is slipping. A failure...

Hi There, It sounds like you may have a dirty or failing idle air control valve causing your engine idle to fluctuate and eventually stall. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is a small valve on the engine's intake system...

Hi there. The oil pan gasket could take from 1.75 to 2.50 hours depending on the technician that is working on the vehicle. If you are not a mechanic and are wanting to change the oil pan gasket and have...

Hi There, It sounds like you may have a couple of different issues. The idle problem may be a result of a dirty or faulty idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as...