Q: Where or who would I go to to have my instrument cluster checked and scanned for codes?

Adjusting the steering wheel is an important thing to do. Having the steering wheel adjusted to the optimal position for you will increase your ability to drive safely, and also increase your comfort. It’s very easy to adjust the steering...

Hi there. When making a sharp turn or going over a bump our car tends to lose much of its ground clearance. If it is a metallic scraping noise then most of the time this is due to part of...

It would be helpful to know how the radio got water damaged, and if the rest of the dashboard was wet.There are other modules and components that are below the radio that could have been damaged.The radio make and model...

Hi there. Yes, a bad wheel bearing can impact the complete operation of your vehicle. When a wheel bearing goes bad (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings), it is due to a lack of lubrication inside the bearing. This creates metal-to-metal contact, increased friction, and...

Hello. It is possible to damage the compressor by introducing liquid refrigerant. The compressor is designed to compress vapor or gas, not liquids which indeed are not compressible. If your system is not working right now, a possibility is you...

Hello and thank you for contacting YourMechanic. The code P1684 is for a battery disconnect from the battery to the computer system. The corrosion on the battery cable will block electrical current from traveling from the battery to the computer....

Hi and thanks for contacting YourMechanic. The fact that the indicator lights are operational proves that the instrument cluster panel is properly grounded. With the key in the "On" position, take a test light and check the feed wire at...

The easiest way I have found to do it is to mark on the intake where number one wire is on cap. Put mark on intake. Also not the distributor wire connector orientation and mark where it is also. Remove...

Hello. In order to remove the shifter you will have to remove the vehicle's shift knob and disassemble the vehicle's interior. From the symptoms you describe, however, it would appear that your vehicle may be experiencing a different issue, perhaps...