Q: Where is a yaw rate sensor located in a caprice 2008

asked by on March 29, 2017

Where exactly is the yaw sensor located in a caprice 2008
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What does the Malfunction Warning light mean?
The Malfunction Warning light is located on the instrument panel, and is connected to your emissions system. When your vehicle’s emissions are not as expected, the Malfunction Warning light will illuminate. The light will also come on if the system...
Car hood won't open
Hello. Overtime hood springs will loose the ability to force the hood up when the hood latch is pulled. It's best to have an extra set of hands when trying to get it open so one may pull the hood latch...
Transmission fluid - 2007 Toyota Tacoma
It is definitely time to have it changed. There should not be any issue with changing it at this point even if it is overdue. Have a local technician, like one from YourMechanic, perform a transmission fluid service (https://www.yourmechanic.com/services/transmission-fluid-service) on...
I have a 2009 chevy Aveo, and my temperature gauge is below the cold line. It my heat is blowing out semi warm.
The lack of heat being generated by your system may indicate a clogged heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this...
Blown head gasket for 8 months can I fix it or is it to late?
If the engine has a blown head gasket then you may have got coolant and water into the engine cylinders and inside the crankcase. Since it sat for a long period then you may have rust that built up inside...
99 for f150 starts then shuts off immediately
Hi There, I would suggest checking the idle air control valve to be sure it is not sticking. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the...
Why does my car jerk when i pull off ?
What you are describing sounds like a dirty or faulty mass air flow sensor. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) monitors air intake as it is mixed with fuel prior to being injected into the motor. This sensor relays vital...
Car wont start or crank
If the starter is not functioning, the electrical fault could be in any component, or wiring segment, in the starter circuit. No one component is any more likely than another and thus the standard practice is to simply trace the...

Related articles

How Do Sensors Get Dirty or Damaged?
Car sensors measure and relay vital information to the ECU. Some sensors can get dirty from normal use, or fail if the car overheats or has a problem.
2012 Chevrolet Malibu vs. 2012 Ford Fusion: Which One Should I Buy?
When you want a midsize sedan, you’re looking for something that will offer you the best fuel economy for the size as well as additional safety features that will keep your family safe while you’re driving across town or around...
How Long Does an EVP Position Sensor Last?
An An integral part of your vehicle's EGR (exhaust gas recirculation) system is the EVP position sensor. This sensor has the important job of figuring out where the gate is positioned in order to allow gases to pass through to...