Q: When I hit the ignition my gauges jump but the truck will not turn over and when I hit the brakes the head lights come on

asked by on February 26, 2017

When you hit the key it will not turn over fuel line are arking off the block gauges are jumping and the head lights come on with the switch off and when you hit the brakes head lights come on

My car has 300000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How does the driver’s seat position sensor work?
The Driver’s Seat Position sensor helps keep the driver safe in the event of a crash. The sensor will adapt the airbag deployment to meet the needs of the driver. To understand the Driver’s Seat Position sensor. The Driver’s Seat...
What does it mean if the Low Oil Pressure light on the dash is blinking?
Your dash holds a number of very important lights. The Low Oil Pressure indicator is one of the most essential. If this light comes on and flashes, it means there’s something very wrong and you need to take immediate action....
Brakes not working properly.
This can be caused from several different failed parts. First off the loss of fluid is a major leak in the system and an inspection would be needed to locate the leaking part (https://www.yourmechanic.com/services/brake-fluid-is-leaking-inspection). I have seen rusted lines causing...
Battery leaking and car overheating
Hi. The battery can be serviced, but I recommend you replace the battery (https://www.yourmechanic.com/services/battery-replacement) it to avoid further complications. Be sure that any fluid that has leaked onto other parts in the engine is cleaned up. The Check Engine Light...
Interlock is installed but the car won't start and the ECM is fried. Can the interlock damage the ECM?
Hello. Though the shift interlocking system does have an input from the ECM, I have never seen one fail and cause this. Most of the time, this is caused by a bad brake pedal switch or a shift lock solenoid....
Instrument Cluster Lights Come on and Off
This may be related to a short or a faulty instrument cluster voltage regulator. The instrument voltage regulator regulates the voltage supplied to the various gauges in your vehicle’s dash. When this is not working properly, this may cause the...
wipers don't respond to my commands. goes on highest speed and doesn't stop unless fuse is out
Hello, thank you for writing in. The issue is very likely a fault with the wiper switch. While there can be some electrical testing done to verify this, the switches are known to go bad after being used for that...
Smoke from engine cooling fan
It's not unusual for a fan to fail, and you can probably get away with replacing just that. But since the fan seized, there may be a blown fuse or fusible link back in the system that will also have...

Related articles

The Best Used Cars to Buy if You're Hauling a Horse Trailer
Horse Horse owners need a vehicle with towing capacity. Depending on the size of your trailer and the weight of your horse or horses, you probably won’t be able to get away with less than a 3,000-pound towing capacity, and...
How to Download a Chevy Owner’s Manual
When you buy a new car, you’re provided with original documents and books related to your vehicle. The materials you receive include: Your audio system operating information Your owner’s manual Your recommended maintenance schedule These manuals help you know how...
How to Get Chevrolet Dealership Certified
Chevrolet car dealerships offer automotive technician jobs to mechanics who are certified through the many training programs available.