Q: What would be the price to replace the air mass sensor on a 2005 Mazda 6?

Since this is an intermittent problem it may be difficult to diagnose. The first thing I would recommend is to have a technician check your vehicle for trouble codes (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) with an OBD2 scanner. If the check engine light comes...

Hi there, the first step would be reading out possible fault codes stored in both the engine computer and transmission computer with a scan tool. Next would be determining the nature under which the stalling occurs. Does it just stall...

The most common problem is the tube between the air filter and the throttle body has an air leak that can cause the stalling. Try to get the computer scanned for codes and if you have lean codes, then look...

Hey there, To answer your first question, yes, it is very possible to drive a car without a water pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-water-pump). In fact, in the late 90's, it was popular with many shade tree mechanics or hot rod enthusiasts to...

Hey there, thanks for writing in about your 1989 Mercedes-Benz 500SL. Inspect the linkages from the shifter handle to the transmission for any worn or broken parts. A problem here can cause problems shifting as well. If you need help...

Hi There, Your vehicle has a recommended service interval at 10,000 miles, with the next interval at 20,000 miles. If you did not have any services performed at the 10,000 mile mark, this may be why your service light is...

It sounds like you may have broke a timing belt. If you did then you may have bent the valves and caused major engine damage to the cylinder head due to bent valves. If the timing belt did not break...

The sensor is located beneath the intake manifold. To gain access, remove the air filter and intake housing. Remove the drive belt and alternator. Unplug intake tuning connector and then beneath the intake you will see the 2-wire cylinder head...