Q: What would be causing my truck to have a hard time accelerating, jerking occasionally when pressing and releasing gas pedal?

asked by on July 30, 2017

The truck has a problem accelerating. Once it finally starts speeding up sometimes it will jerk when pushing on pedal as well as releasing pedal. When at a stand still it may die or remain running but always resists acceleration especially from a complete stop. We have noticed that shutting truck off and restarting it has helped it run a little better but only for a short time. What could be the cause of this? We have already put a hole in the catalyst converter and still no change. I had an idea that it might be the O2 sensor but not 100% positive. I also thought fuel filter as well but can't be absolutely sure on any of them being what's causing these issues. Please let me know something, anything will help. I prefer to be sure before spending a pretty penny on a part I didn't need to replace. Thanks!

My car has 103580 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Airbag light is on
Hi there. An airbag light is an indication there are fault code(s) present, I suggest having a certified mechanic, like one from Yourmechanic, scan your vehicle for airbag codes (https://www.yourmechanic.com/services/air-bag-light-is-on-inspection).
Removing medium deep scratches from the paint
Unfortunately, when it is that deep, the best thing you can try yourself may be various levels of buffing (https://www.yourmechanic.com/article/how-to-buff-a-car). You can do the coarse, medium, and fine buffing. Try buffing them out and try painting it over (https://www.yourmechanic.com/article/how-to-paint-a-car-yourself). When...
Difficult startup, chugging and rough revving
Hello. If the engine is having trouble starting after it has ran for a while and you are getting the smell of fuel, then it may be a failing fuel injector (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-injector) or an issue with a bad sensor. Most...
Check engine light keeps coming back on
Hello. I would need to know the exact codes to be able to give good information about this. If you have a reoccurring misfire code, then a compression test needs to be done to see if there is an internal...
There is a hole directly below the heater core hoses on the firewall of the engine compartment that is dripping coolant
This is the A/C heater evaporator case drain. If you see coolant leaking from it then you have a blown out heater core inside the evaporator case. If you do not get it fixed soon the engine will run out...
Car doesnt turn on as there is a clicking noise. 2010 Chevrolet Impala
Hello - your symptoms, and the order in which they occurred, suggest that the alternator (https://www.yourmechanic.com/article/how-the-car-alternator-works-in-your-car_2) was not charging adequately (or the battery has failed), and the battery ran down over the course of a couple of days. I would...
My car will not crank
Hello. A whining sound coming from the engine in a no start condition is usually a sign of a loss of compression. A compression test must be done to determin if that is your case.A loss of compression may be...
My 2004 Honda Element horn makes a sound, but it's very weak. Will the horn relay replacement fix that?
Hi There, I believe you are correct in that the horn relay may be faulty or potentially you may have a bad horn switch itself, however this would be a rare situation. The horn relay (https://www.yourmechanic.com/services/horn-relay-replacement) is generally what will...
My car says the door is ajar but it really isn't
One of the more common causes of a false "door ajar" warning light is stuck contacts in the electrical switch in the door pillar. The switch can be tested. Sometimes the switch can be cleaned or serviced but that can...

Related articles

A Buyer’s Guide to the 2012 Ford Edge
In In the ‘80s, families drove station wagons. In the ’90s and ’00s, those got replaced by minivans and SUVs. Today, more and more families are opting for a more fuel efficient compromise that’s also a little sportier and more...
A Buyer’s Guide to the 2012 Ford Taurus
The The Ford Taurus received something of a revival over the past several years, and it has become one of the family sedan staples in the United States. It’s a beautiful and bold looking vehicle that offers a wealth of...
How to Find the Keyless Code on a Ford Explorer or Mercury Mountaineer
Many Many Ford Explorers and Mercury Mountaineers were manufactured with an option known as the Ford keyless entry keypad. Some models refer to it as SecuriCode as well. It is a five-button numeric keypad that is used to: Eliminate fumbling...