The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Hi there. This code is set when the PCM detects a fault in ignition coil #1. There are 6 coils in your vehicle. The problem may be the coil itself or it may be a wiring issue. Diagnostic information along...
If you have already replaced the bulb, the problem may be with the wiring, or with the headlamp control module that your particular vehicle has. You will need to find a VW qualified technician to inspect and get headlamp working...
Hello. It sounds like you could have a couple of different problems. The brakes seem to be worn out and you have a possible problem with your brake booster. The ABS and traction light being on means that there is...
Hello. It is unusual but not unheard or to see brake pads wear so quickly. A number of things could cause that. A lot of stop-and-go traffic, driving hard on the brakes in stop-and-go traffic, a hydraulic issue like calipers...
Check the drive belt and see if it has a glaze to it. If so, then the drive belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) is stretched and needs replaced. A drive belt has a life span of about 25K miles. Having 40K miles on...
Once the car engine is completely cool, I would check the coolant level in the radiator and the reserve tank. If the level is low, you may have had a sudden leak of coolant. In that scenario, the white smoke...
Pulling to one side, without the brakes applied, is caused by misalignment, tire defects or uneven tire inflation (from side to side). Vibration on braking is typically due to rotor runout and/or thickness variation in the rotor(s). Vibration at speed,...
The problems will be two different ones unless the failure code is for loss of fuel tank vapor pressure. I would recommend having fuel leak fixed first and then having the computer scanned for the failure code to see what...
Hi Teleisha. Thanks for contacting us today. There could be multiple issues causing the Avenger to run hotter than normal, ranging from an obstruction of debris in the cooling tubes or heater core, or failed water pump - even fuel...
The The engine of your car produces a lot of heat. Making sure that the heat that the engine produces does not affect its overall level of functionality is the job of the heater hoses. As the coolant in the...