Q: What can I do and if it needs to be fixed how much?

asked by on March 04, 2017

I'm having problems with my 2008 chevy impala. The car turns on but when you put in Drive it goes nowhere the engine revs but the car doesn't move. It works in gears 1, 2 and also reverse but not 3 or Drive. What do I do?

My car has 95000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

My car will not start. I changed the head gasket an now it will not start.
If your car was not running and a computer update got it running but the engine would shut off so you did a tuneup, brakes and a head gasket. You might have problems with the installation of the head gasket...
cycling humming/buzing noise on highways 65-80 mph
Hey there. There may be a recall (https://www.yourmechanic.com/article/how-to-check-if-your-car-has-recalls) on your vehicle to reprogram the transmission control module on the vehicle. The noise may be from the transmission CVT. Have the dealer check for any recalls on the CVT or any...
Loosing oil
Hello there, loosing oil can become a big problem with your 2010 Nissan Micra if left unattended. If no visible leaks are seen than you are correct the oil is most likely being burned. When oil is burned there are...
Automatic transmission
Hello. This is a very robust transmission, as your advanced mileage demonstrates! The downshift issue you have described is likely either the governor (possibly a broken spring?), internal to the transmission, or an issue related to the throttle position sensor...
Car is stalling
You may have a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. Since...
Would a 2000 VW Passat 2.0 ECM fit in a 2002 VW Passat v6 3.0?
Hi there. The Engine Control Module (ECM) on a 2.0 engine will fit on the 3.0 engine, however, the ECM may have to be flashed (reprogrammed) to the vehicle you have. If the engine block was swapped out, then the...
Why is my 1981 Toyota Pickup burning coolant
Hi there. If the engine continues to burn coolant then you may have a warped block or there are a few other places where coolant can enter the engine. I have seen cracks in the timing cover and in the...
my 2005 cadillac escalade wont shift out of first gear what can be the problem
Hi there. Thanks for your email to YourMechanic.com's Ask a Mechanic. In most cases, when a transmission will not shift out of first gear, it is due to one of two things. First, and most common; is due to dirty...
Flywheel makes squealing when clutch is not pressed
Hi Daniel. Thanks for writing in today to YourMechanic.com. Typically when you hear a whining or grinding noise while the clutch is not activated, it's caused by one of three possible sources. First, it's possible the flywheel has become unbalanced...

Related articles

A Buyer’s Guide to the 2012 Chevrolet Traverse
You You might not always need all of the cargo and passenger space available to you when you buy a 2012 Chevrolet Traverse, but it’s nice to know it’s there. This seven-passenger crossover utility vehicle (CUV) has tons of space...
2012 Chrysler 200 vs. 2012 Chevrolet Malibu: Which One Should I Buy?
When you are looking for a small-range sedan, you need to get somewhere quickly and inexpensively, and may even need to take a few kids with you. Slightly larger than a commuter car, these mid-size options offer decent gas mileage,...
Understanding Chevrolet Oil-Life Monitor (OLM) System and Lights
Car symbols, or dashboard lights, are a car service reminder. The Chevrolet Oil Light Monitor system indicates when and what service your car needs.