Q: Water hose problem that is connected to a metal tube.

asked by on December 25, 2016

The end of a water tube is connected to the metal tube, which is connected to another metal part, which seems the water goes through the transmission? (I'm not sure if the goes through the transmission or not) but it seems like it does, I have picture but not sure if i can send trough here.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What does the forward collision alert (FCA) Warning Light mean?
The forward collision alert (FCA) system is a key safety feature in your vehicle that helps alert you when you are rapidly approaching a vehicle. The FCA Warning Light is located in the middle of the instrument panel. The FCA...
Car shuts off when stopped or going slow
There are many reasons why a vehicle may stall at a stop or at low RPM. I would recommend having your vehicle's stalling issue inspected (https://www.yourmechanic.com/services/car-is-stalling-inspection) at by a knowledgable technician, such as one from YourMechanic, to determine the exact...
Battery light is still on after getting a new battery and alternator
The Honda Element has a computer-controlled charging system to help improve fuel economy. In the engine compartment fusebox there is an ELD unit that monitors electrical loads of the vehicle consumers and will communicate with the engine computer to turn...
Service tire monitor warning, tire pressure a bit high
This is likely due to the fact that the person who changed your tires may have broken your TPMS sensor in that particular wheel. If the pressure sensor is not giving a signal at all, this would mean that the...
How can I access the rear trunk?
Hi and thanks for your question. The release levers for the trunks are manual and there is a "lock out" plate to prevent them from being released when the car is locked or the driver's door is closed. Use a...
Replaced rt.& Left Rotors and brake pads. Also Rt. hub. the problem is ABS & brake light still come on. Does this have be reset ? 2004 Buick Ranier
Hello - the short answer is "Yes", the ABS problem code (https://www.yourmechanic.com/article/what-to-do-when-your-abs-light-comes-on-by-spencer-cates) needs to be cleared with an appropriate Scan/Reset tool. This also begs the question "Was the ABS specific code read when the ABS light first came on, so...
Car stalls while driving. It will start up after about 10 minutes.
Hi There, What you are describing sounds like an ignition coil pack that may be failing. Ignition coils are prone to this type of erratic functioning or heat cycling when they are beginning to fail due to the temperature fluctuations...
Car has less power when accelerating and louder when accelerating. No Service Engine lights
Slow acceleration (https://www.yourmechanic.com/services/car-is-slow-to-accelerate-inspection) has a variety of causes. Fuel injectors can become clogged over time as the tiny passages become clogged. When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly...

Related articles

A Buyer’s Guide to the 2012 Ford Fusion Hybrid
The The 2012 Ford Fusion Hybrid is a really great choice for anyone looking for a mid-size sedan. Not only does it boast plenty of room for people and cargo, but it also has a good amount of power and...
A Buyer’s Guide to the 2011 Ford Ranger
The The 2011 Ford Ranger offers affordable pricing with excellent styling. It is a compact pickup that is both inexpensive to operate and own. The vehicle is capable of going off-road while still being able to tow 1,600 to 3,100...
How to Replace a Cooling Fan Resistor
The cooling fan may not work at all speeds if the resistor is broken. If the engine overheats or the fan never turns off, the resistor may be faulty.