Skip the auto shop - Our mechanics make house calls

Q: Van idles rough

asked by on

When in idle-- it idles real rough.... it sounds like it almost wants to shut off... it kind of like revs then almost dies then revs then almost dies... It has died once while waiting in a drive through...Only code is a emissions gas code unfortunately I cant remember the number ... but it led me (who knows nothing about cars) to think it was no big deal and the code and check engine light actually went away by itself..... Please.... Help :) Thank you for any words of wisdom and guidance :)

My car has 190000 miles.
My car has an automatic transmission.

Your car has a small purge valve that controls the venting of fumes from the fuel tank as these fumes build up inside, particularly when you are refueling the car with gas. The EVAP system prevents fuel vapors from the fuel tank from escaping into the atmosphere. The EVAP system collects and temporarily stores the fuel vapors in the charcoal canister. The charcoal canister is filled with activated carbon pellets that can absorb the fuel vapors. When the engine is running, the fuel vapors are purged from the canister and burned in the engine. The vent control valve (solenoid) controls the flow of outside air in and out of the charcoal canister. The vent valve is controlled by the engine computer (PCM). Normally the vent valve is open. It closes when the engine computer tests the EVAP system for leaks. If a leak in the EVAP system is detected, the Check Engine light will illuminate on the dash and the trouble code related to the problem will be stored in the engine computer. When an air leak is present in the EVAP system, the MAP sensor will not be able to determine the air density, and the MAF sensor will not be able to determine the volume of air, entering the engine correctly. This will lead to an over fueling situation or an under fueling situation depending on the size of the air leak and engine operating speeds and load. This may eventually lead to catalytic converter problems as well as misfiring problems. I would recommend having an expert from Your Mechanic come to your home to take a look at your car to diagnose your EVAP purge solenoid.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Emergency brake rusted to wheels

Hi. I'm not exactly sure what you mean, but the parking brake cable may be seized. Rust on the face of a brake rotor or brake drum is normal and not a cause for concern. It looks like your parking...

Q: When I come to a stop my truck stalls and/or shuts off. It also idles real low at a stop 2008 Toyota Tacoma

Hello - first task is to check for blown fuses, failure of the cigarette lighter circuit may indicate additional wiring problems. The stalling at idle and low idle speed may indicate a failed or dirty idle air control valve or...

Q: My car surges forward after I hit the brakes

There seem to be a number of these complaints popping up, though there haven’t been any verified repairs made. Your best course of action is to take the vehicle to the local Kia dealer (as this may be a warranty...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.