Q: Twin Turbo Installation and Advice.
I would like to twin turbo my Mitsubishi lancer. I would like to have help on the installation of this and I would also like to know if there are any OEM parts I should swap for Aftermarket ones.
My car has 100569 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
2008 Suzuki SX4 not going into gear
Hi. It sounds to me like there is some sort of mechanical binding in the shift linkage, probably requiring some level of disassembling and cleaning. Also, some rust might have formed somewhere underneath the car. If you need further assistance,...
Engine noisy even after turning ignition off
Hello, It looks like you are experiencing two different issues here with your Mazda 3. First, the shaky steering wheel at higher speeds is due to the the vehicle's tires being out of balance. Taking your Mazda to the nearest...
Replacing timing belt on a 2001 Ford Escape
Yes it is and you should change it right away, because mileage is mileage and time is time. That baby is 15 years old. They tell you that you are supposed to change the belts and they are only good...
Accidentally ruined ECM reconnecting battery with ignition switch on
From what you've described, you may have hurt the ECM when you did this but at least it starts. You may be able to test the system to see if the idle air control valve is the faulty component that...
How to diagnose coded p0352,0352,0353, already had new plugs and coils before code throw
Hello. The codes listed are for problems with the electrical circuits of ignition coils A, B, and C. If the coils have been replaced it may be possible that the wiring to them is the source of the issue. You...
Low beams are quite dim, high beams seem OK. Although filaments turn on inversed.
Hi there. Typically, dim lighting is the result of a poor ground (https://www.yourmechanic.com/services/electric-problems-inspection) in the given lighting circuit. This poor ground may also account for the fog lights not functioning in the low beam position. Circuit testing with a wiring...
Where and how do I check the transmission fluid? 2007 Toyota Tundra
Hi there - there is an oil port on the side of the transmission case where oil level can be checked. Requires getting the truck up on a lift. There is a specific process (and fluid temperature) for this check,...
With the air on or off my car hesitates at take off and going up any size hill and will not go over 40 in my 2002 Pontiac Bonneville
It is possible that you could have an issue with your crankshaft or camshaft position sensor. Fuel issues may also be the cause of your symptom. It is very likely that trouble codes were stored in your vehicle's powertrain control...
My 2005 chrysler sebring turn signal and hazzards are not working fuse is good. Replaced front blonker bulbs and relay switch in s
Hi Linda. Thanks for contacting us today. When both the hazard lights and turn signal lights are not working, it's commonly due to a faulty or exposed wire. If the relay and fuse you replaced were both damaged, I would...
Related articles
A Buyer’s Guide to the 2012 Mitsubishi Galant
If If you’re in the market for a midsize sedan and want the best price possible, you may be thinking about visiting a Honda or Toyota dealership. Before you do, check out the 2012 Mitsubishi Galant. Key Features Considering how...
The Best Used Cars to Buy If You Have a Tiny Parking Space
In In many cities parking spaces come at a premium, so you only want to purchase one small space. This small space will end up dictating what vehicle you purchase, so we’ve rounded up some great candidates. Must-haves Arm yourself...
Mitsubishi Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Mitsubishi vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
Browse other content
Cities
Services
Maintenance