Q: Turn signals are not working

asked by on December 25, 2016

turn signal don't work check fuse its good changed switch still do not work

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I check the condition of the battery?
Without a working battery, your car isn’t going very far. While the battery in your Accord is designed to last for years with only minor maintenance requirements, it will eventually need to be replaced. Thankfully, it’s easy to check its...
Car not starting.
If the engine cranks slowly, you have a problem with the starting/charging system. If the engine cranks normally but doesn't start, you likely have a problem with fuel or spark delivery. In either case, it probably doesn't start after a...
Random transmission slipping?
Sounds like you have a fluid pressure problem which could be related to an internal solenoid to the transmission, low fluid, or a bad torque converter/fluid pump. An engine/transmission code scan with an advanced scan tool is needed in order...
key won't start engine
It is possible that you could have one of two issues. You could be experiencing a bad alternator (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-alternator) problem that is causing your battery to be drained and become faulty well before it should be. In this case, I...
Act like it runs out of gas but it doesn't
It sounds like you're having a fuel pressure issue. If you have a fuel pressure gauge, connect it to the shrader valve on the fuel line under hood and check the readings. It should be over 10psi if it has...
Rear of vehicle is low to the ground
Hey there, thanks for writing in about your 1989 Chrysler New Yorker. The lowered vehicle may be from the previous owner cutting the springs out of the rear struts. This vehicle also has a rear shock system that uses air...
Engine misfire - 2005 Chrysler 300
Code P0300 (https://www.yourmechanic.com/article/p0300-obd-ii-trouble-code-random-multiple-cylinder-misfire-detected-by-jamahl-walker) relates to a random cylinder misfiring which can be caused by many different issues such as the following: Faulty spark plug (s) (https://www.yourmechanic.com/services/spark-plugs-replacement) Faulty ignition coil (s) (https://www.yourmechanic.com/services/ignition-coil-replacement) Clogged or faulty fuel injector (s) (https://www.yourmechanic.com/services/fuel-injector-replacement) Intake air...
Intermittent wiper speed setting is not working
The problem could be the intermittent wiper module in combination with the wiper switch or in the wiper motor itself. Problems occur with both of these components and only a component pinpoint test can narrow down the problem for you...
Are your services available today and tomorrow?
Hi there. Your Mechanic is available 7 days a week and is dependent upon coverage for your area and the technician's current availability. For further assistance contact customer service with your concern and needed information: year, make, model, mileage, and...

Related articles

3 Essential Things to Know About Your Car’s Turn Signal
The turn signal on your vehicle is mounted on the front and back of the vehicle, on both the...
How Long Does a Hazard / Turn Signal Flasher Last
Staying Staying safe when navigating the busy roadways out there can be a lot easier said than done. Most cars have a variety of different systems built in to increase the overall level of safety that a car has. The...
How to Replace a Combination Switch Assembly
Combination switches include the control of turn signals, windshield wipers, windshield washers, and high beams. Faulty switches can cause accidents.