Q: To your knowledge, does the PCM ever have to be reset?

asked by on February 18, 2018

Example, transmission replacement. Will I have to reset the PCM after a transmission replacement? If so, can you let me know where the PCM is located and how to reset it?

My car has 207000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do you change the language on the rear view monitoring system?
In addition to providing you with a live video feed of the area directly behind your car to assist with backing out of parking spots and other situations where you need to use reverse, the rear view monitoring system also...
How do I unlock the car with the smart key?
The smart key allows you to unlock your vehicle without using the key. Here’s how to use the unlock feature: 1. Make sure the smart key is on your person, such as in your pocket. 2. Press the button on...
Gear selector stuck in park
Hello. This is a common problem in both Chevrolet and GMC trucks and SUVs of that year. The safety system requires pushing on the brake to start the vehicle, so the problem is likely that the brake switch on the...
Rusted brake line
If you have one brake line rusted out, then I would suggest having all the brake lines checked for rust damage. If one line has a leak then the rest are most likely rusted to the point of failure also....
Van makes a thud sound when making a right turn at low speeds
Hello. The most common cause of this issue is worn out rack and pinion bushings. The bushings hold it in place and keep it from moving when you are turning. Over time, these will wear out or will get oil...
Power steering noises when turning steering wheel
Hello. Changing the transmission fluid will not help to quiet down the power steering pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-steering-pump). If you meant to say that you were going to change the power steering fluid then that may help. I usually start by checking...
Clunking noise, and poping sound when turning hard
Hello and thank you for contacting YourMechanic. When shifting your vehicle from park to drive or reverse, there is usually a problem with a universal joint in the drive shaft. The clunking noise is the bearings in the universal joint...
Hi temp low oil and low oil pressure warnings come on
Hello. The warning lights that are coming on can be caused by a few different things. If all three have come on at the same time then it is very likely that the oil has run low. Aside from causing...
Fuel in fuel rail but will not start up
Fuel could be in the fuel rail but if the fuel pressure is inadequate and/or the injectors are not functioning of course the engine won't start. Inadequate fuel pressure could be caused by a faulty fuel pressure regulator and injectors...

Related articles

A Buyer’s Guide to the 2012 Acura TSX
The The 2012 Acura TSX is a luxury midsize sedan that comes with superior comfort and convenience. This vehicle offers excellent fuel economy, reliability, and a simple pricing structure for a variety of different budgets. It drives easily down the...
2012 Honda Pilot vs. 2012 Acura RDX: Which One Should I Buy?
Sport utility vehicles are fun in the sun, sand, dirt, mud, and even in the carpool line at school. Whether you’re hauling around your family or your family of pets, these SUVs are sure to make even a drive around...
How to Modify the Alpine Navigation in an Acura or Honda
Modifying Modifying the original equipment manufacturer (OEM) navigation system of your Acura or Honda vehicle with aftermarket software is an easy way to add additional customization features to the already-installed system. Using a simple third-party computer program and a DVD-ROM...