Q: Tire on back passenger side keeps locking up once you hit 20MPH.

asked by on January 02, 2017

The breaks, rotators, and callibers were all changed less than 2 months ago. Today I changed the rubber hose on the back passanger side tire. why does the tire keep locking up?
My car's transmission is unknown to me.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I replace the climate control air filter?
The climate control air filter will need to be replaced periodically. Replacing the filter is a quick and easy task: 1. Open the glove box. 2. Rotate the stoppers on either side counterclockwise, until they can be removed. 3. Remove...
Car has oil leak around middle of engine
Hi there. An oil leak can be a very frustrating ordeal to go through. There are Many types of oils in your vehicle including, engine oil, power steering fluid, transmission fluid, and also coolant. To ensure proper diagnosis, I would...
Hear a knocking noise when car is in gear
It is possible that the recirculation door on your vehicle defaults to a particular setting when the vehicle is in park, and the opposite setting when in gear. This could be due to the fact that more outside air is...
Car was cutting off at random, now it won't start.
Hi there. It sounds like there is a possibility of a fault with the MAP sensor system (https://www.yourmechanic.com/services/manifold-absolute-pressure-sensor-map-sensor-replacement) for the P0108 code (https://www.yourmechanic.com/article/-p0108-obd-ii-trouble-code-manifold-air-pressure-map-barometric-pressure-sensor-circuit-high-voltage-input-problem-by-john-nelson), an EGR fault for the P0401 (https://www.yourmechanic.com/article/p0401-obd-ii-trouble-code-exhaust-gas-recirculation-flow-malfunction-by-jay-safford), and a catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) fault for the P0420 code...
Can you just replace the clutch on the AC compressor or do you have to replace the whole thing?
Yes you can just replace the clutch pulley on the a/c compressor. The issue that you may have is the pulley bearing seized up and may have spun on the front of the compressor nose cone and will damage it....
I have a 1998 chevy k1500 and the drivers side door will not open. The latch is jammed up. How can I open the door
Hello, thank you for writing in. The door will need to be opened from the inside to minimize the amount of damages done. This can be tricky, but can be done. You will need to carefully remove the door panel....
Jeep is having a hard time starting. 2004 Jeep Grand Cherokee
Hi there - your symptoms suggest a fuel supply issue, quite likely a fuel pressure check valve (https://www.yourmechanic.com/question/car-takes-multiple-tries-to-start-when-cold-fine-when-warm-new-battery-dlr-says-check-valve-on-fuel-pump-assembly-needs-entire-assembly-by-scott-f) or fuel pressure regulator issue. Either of these can allow fuel pressure in the injection system to leak down while the vehicle...
Why doesn't my transmission shift properly after changing my throttle body and valve assembly on 2000 Nissan Maxima?
Hi there. In some rare instances, if you completed the replacement of the throttle body without removing the battery cables, the ECU will trigger an error code that can disable some electrical systems; including the shift solenoid of the transmission....
Gas fuelled car starts chugs/makes a noise and turns off, might be the solenoid?
The first thing to do is to have the computer scanned for codes. Then check to see if the engine is getting good fuel pressure and has good spark. If you have no fuel or spark then the fuel pump...

Related articles

How to Buy a Good Quality ABS Control Module
The The ABS (anti-lock brake system) control module, which is also known as an EBM (electronic brake module) or EBCM (electronic brake control module) works almost like an engine control computer. This microprocessor receives input from sensors to prevent wheel...
Is it Safe to Drive With the ABS Light On?
The ABS warning light means the anti-lock braking system isn’t working properly, and may not work if you need to stop your car quickly.
How Long Does an Anti-Lock Brake (ABS) Fluid Level Sensor Last?
Your Your ABS system works both by means of electricity and hydraulic pressure. Fluid levels need to be monitored at all times, and that is the job of the ABS fluid level sensor. Located in the master cylinder, the ABS...