Skip the auto shop - Our mechanics make house calls

Q: Timing chain replacement

asked by on

Do I turn the crank until the marks line up before removing the original chain or is there another way to get the camshafts in the correct position before installing the new chain?

A: Hi there! You should line up the all marks ...

Hi there! You should line up the all marks before removing the original chains. If you are having trouble or do not feel comfortable moving forward with this repair, an expert technician from YourMechanic can come to your car’s location to replace the timing chain for you.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How Do Drive and Serpentine Belts Work?

Accessory drive belts are used to transfer rotational motion from the crankshaft to the other accessories on the engine. The driven accessories include the generator, power steering pump, air conditioning compressor, secondary air pump, and the water pump. There are...

Q: I have injector circuit open on 2, 4, and 6 error codes (codes P0202, 204, and 206)

Hi James. I would suggest purchasing a service and repair manual for your 2006 Cadillac CTS, as it will provide you with a wiring diagram for the fuel injector wiring. It is very common on these Cadillac's for the wiring...

Q: Rpm not increasing

Without additional information regarding symptoms, this would be very difficult to diagnose. It's not very clear what is happening in this situation. Is the RPM not increasing during idle? is the tachometer not increasing as your car moves? or are...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.