Q: timing belt

asked by on February 11, 2017

would like to take a look at my timing belt by cutting away the top of its case and glueing it back after i finish.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car won't start after sitting.
As a car sits it is still using the battery so after a few months it is common for the battery to be drained because it hasn't been charged by the alternator. Jump starting it should work to get the...
Ticking noise becoming faster with higher RPMs
Hi there. In most cases, if this happened all of a sudden and went away after a moment, then it may just be low on oil (https://www.yourmechanic.com/services/oil-level-is-low-inspection) or it may need an oil change (https://www.yourmechanic.com/services/change-oil-and-filter). I would check the oil...
Excessive oil consumption, oil in spark plug holes, normal compression
The oil getting into the spark plug holes is from the valve cover and spark plug tube seals. Replace both of these and clean out spark plug holes of oil. This will help with the misfires and coils shorting out....
Transmission not shifting, overdrive button on dash doesn't work
Hello, thanks for writing in. I'd be happy to offer my insight. It sounds like your car has an electrical problem. I would start by checking the signal going to the transmission from the computer. It may not have the...
if the AC compressor is seized can the belt smoke when it is turned on?
Hi and thanks for contacting YourMechanic. If a serpentine belt goes around an a/c compressor clutch pulley and the compressor is locked up, it is okay to have the belt as long as the a/c compressor clutch is not activated....
Should I have concerns on a check engine light flashing for 2 seconds just after startup and acceleration?
Hi there. What code/codes are stored in the ECM? Weak ignition coil/coils, oil saturated spark plug wires, worn spark plugs, weak/broken ignition coil electrical connectors (very common on the Toyota/Lexus straight 6 cylinder engines), cracked/split intake hose chamber (also common),...
On the radiator cap there is light brown pudding/paste deposit.
Hello Daniel, thank you for writing in. While these issues are frustrating, it may be as simple as needing to flush the system. Yes when you flush the entire system, you should be able to flush the water pockets as...
My injectors are not pulsing.
Have the power and control circuits for the injectors been tested? If the injectors do have power, but no ground control from the computer to turn them on there may be a fault in the circuit or the electronic control...
PO420 Efficiency below threshold bank 1. Catalytic converter or O2 Sensor?
Hi Justin. Thanks for contacting us today. At first glance, the numbers you listed indicate that the catalytic converter is likely clogged. You might want to read this article about the OBD-II trouble code you've listed (https://www.yourmechanic.com/article/p0420-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-1-by-jamahl-walker), as it will...

Related articles

Maintenance Minder and Service Codes For Acura Cars
Acura scheduled maintenance is tracked by the Acura Maintenance Minder system. Main codes A and B combine with sub codes for exact service, like A1.
Understanding the Lincoln Intelligent Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Lincoln Intelligent Oil Life Monitor indicates when and what service your car needs.
How to Replace a Car Combination Valve
The combination valve balances your brake system. If broken, it should be replaced to ensure a safe driving experience.