Q: Q: Taillights not working

asked by on

The taillights aren't working.

The taillights would need to be checked to see if water has gotten into the lights and caused a problem with the bulbs sockets, particularly if they are getting power from the light switch. I recommend having a mechanic, like the ones from YourMechanic, inspect your entire rear lights system, and recommend the best path to repair.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Taillights not working

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Window motor

Hi. The driver's window switch may be getting water or other liquids inside and the window switch is shorting out. There is a recall to replace the switch if failing, and cover the switch in butel tape to make it...

Q: wippers stopped working checked fuse seams ok

The recommended diagnostic is a non-working wiper inspection. The mechanic would determine if power is reaching the wiper motor when the steering column mounted switch is in the "on" position. If there is power to the motor, and yet no...

Q: Replaced both upstream and downstream o2 sensors. Should the engine light go off right away?

Hi Manuel. Thanks for contacting us tonight. Sometimes when an error code for an O2 sensor is triggered, it's not caused by the sensor - but the electrical harness. Plus, anytime a code is set, it needs to be cleared...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.