Q: Q: Steering wheel locked

asked by on

Nissan rogue 2013 steering wheel is locked. The key goes in and turns . This is not a problem. I pressed the brake and tried to steer the while towards right and left with no luck. Also tried turning the engine on and at the same time tried turning the steering with no luck as well. The engine also is not turned . May be its due to the steering lock?

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Steering wheel locked

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Why does my B1 service code show? I serviced it 3 months ago

The service intervals for Hondas are set to turn on the service light at a certain mileage and should be every 5,000 miles. If whoever did your last service did not reset the service back to zero then the light...

Q: What does the charge Warning Light mean?

The charge Warning Light is located on the instrument panel, and will illuminate when your battery is not charging properly. When this light comes on, have your vehicle serviced as soon as possible to avoid having the battery die. Tips...

Q: How do i know if there is current going to the ignition coil

Hi Lazaro. Thanks for contacting us tonight. There is a procedure for testing the ignition coils, but we can't post that here - as it's listed in the service and repair manual for your vehicle, with imagery that really helps...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.