Q: SPARK PLUG AND WIRE REPLACEMENT 120000 MILES
MY MILES ARE 120000 AND I HAVE NEVER HAD SPARK PLUG AND WIRE REPLACEMENT WOULD THAT HAVE THE VEHICLE MISFIRING AND CAUSING OBD CODE P0300?
My car has 120000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Engine cuts off
Unfortunately, with the information given for your Nissan Maxima, it is difficult to give a proper diagnosis at this time. From this description, I see that you in fact have replaced some components related to this issue already. I feel...
The car turns off suddenly, no check engine light
Hi there. If the vehicle is just randomly turning off like this, it is almost always caused by a bad crank position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) on this engine. This is very common and it will not turn on the Check Engine...
Won't start after fueling - 2008 Kia Rio5
Check for spark at the plugs when this occurs. If there is no spark, check for a bad crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) (heat failure), and also for a failed connection between your ignition key, which is part of the electronic...
I have oil and water mixing in the engin but there is no oil in on the plugs.
No. There is only 1 common possibility for this engine to get water into the oil, and that is a blown head gasket. This often, but not always, follows an overheating event, and some times also occurs with vehicle mileage...
Getting a P0017 trouble code - 2007 Isuzu i290
Hello and thank you for contacting YourMechanic. Most likely you have a loose connection or a sensor is failing. Check the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) and the camshaft position sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) for any damage and make sure that they are...
Passenger seatbelt light stays on
Typically, when you have a passenger seat warning light on, there will be diagnostic warning codes associated with it, that can be pulled using a diagnostic scan tool. Normally, they will show that there is a problem with a seat...
2004 lincoln ls waht makes the rear end sway
It sounds like you may have a broken or damaged sway bar or stabilizer bar. A sway bar or stabilizer bar is a steel bar that connects suspension components on opposite wheels. Its purpose is to combat body roll when...
Related articles
Symptoms of a Bad or Failing Camshaft Seal
Visible signs of oil leakage and smoke coming from the engine bay can point to a failing camshaft seal.
Oldsmobile Certified Pre-Owned (CPO) Car Program
If If you are in the market for a used Oldsmobile vehicle, it may be that you have considered a Certified Pre-Owned, or CPO, vehicle. CPO programs allow owners of used cars to drive with confidence, knowing that their vehicle...
Understanding the Oldsmobile Oil Life System and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Oldsmobile Oil Life System indicates when and what service your car needs.
Browse other content
Estimates
Cities