Q: Serpentine adjustment pulley

asked by on February 16, 2017

My serpentine adjustment pulley is new, so is the serpentine belt. Why does the pulley stop turning and is burning my new belt?

My car has 186000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car driving sluggishly and hesitating
Since this vehicle is a 1985 model, there may be more than one issue causing this problem. The hesitation and sluggishness that you are experiencing with your vehicle may involve fuel pressure or ignition system problems that these vehicles have...
transmission Swap
Unfortunately, no. The only other cars that will interchange with yours are the following: 2000 Chevy Lumina 3.1, 2000 Pontiac Grand Prix 3.1, and only year 2000 for other Buick Centurys. Other transmissions may look the same and bolt up...
Won't start
If you are trying to get a new key to work with the vehicle, you will need a factory scan tool to program the key to the vehicle. If you replaced the computer, you will also need the dealer to...
Bubbling in coolant overflow tank
Seems to me like you just answered your own question. The coolant bleeder is stuck. If you cannot get the coolant bleeder unstuck then you should see bubbles in the overflow bottle for up to a week to completely get...
Looking at buying new rims, different centre bores and offsets.
Hi there. You can change the rims (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-rims) on the vehicle and the 5mm offset difference will not make much difference with the mounting and clearance with anything. Keep in mind, when changing a wheel (https://www.yourmechanic.com/article/how-to-remove-the-wheels-from-your-vehicle-by-robert-tomashek) from 40mm offset to...
IAC or Fuel Pump?
Hi There, Based on what you are describing this could be related to either the idle air control valve or the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) as they both impact the flow of the air/fuel charge into the motor. I would be...
Car wont start even with jumper cables
It sounds like your battery is completly dead. This could have happened either because the battery is old and failed or because the alternator is not sufficiently charging the battery. This issue can be resolved in two different ways depending...
I have a 2015 Volkswagen Gti, and when I accelerate fast the EPC light comes on and the car loses power and begins to shake. I nee
Most of the engine components should be covered for 100 thousand miles. This isn't just factory policy, this is US law. Any component that could be part of the emission control system has to be covered and that would include...
I hooked jumper cables up backwards now my truck won't fire off without spraying starter fluid
Determine if the fuel pump is actually running. The fuel pump should run momentarily at key on to pressurize the system. If it isn't running, you have an electrical problem. If the pump runs momentarily as is required at key...

Related articles

A Buyer’s Guide to the 2012 Toyota Tacoma
Available Available in regular cab, access cab, double cab, and Xtracab versions, the 2012 Toyota Tacoma is Toyota’s answer to all of your compact pickup truck needs. In fact, Toyota has outsold both Ford and GM models, and the Tacoma...
How to Tighten a Drive Belt
If you have just replaced your drive belt (https://www.yourmechanic.com/article/common-signs -your-drive-belt-needs-replacement) and you are noticing high-pitched squeaking or squealing under the hood,...
Top Automotive News & Stories – September 3-9
This week's top auto news: Ford's 3D printed future, Dieselgate guilty plea, Toyota Supra prototype spied, LaFerrari Aperta on the road, and more.