Skip the auto shop - Our mechanics make house calls

Q: Rear sway bar makes noises

asked by on

The rear sway bar makes noises.

The rear sway bar is mounted to the vehicle by means of stabilizer links along the suspension and mounting bushings on the chassis. A fault with either set of mounting hardware can definitely cause some noise, especially while going over bumps or turning. Have an experienced mechanic, like the ones we have here at YourMechanic, come out to your home or business for an inspection of your vehicle’s suspension, steering and brakes systems to verify the concern and move toward a repair.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Rear sway bar makes noises

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Intelligent Access intermittent problem

Hello. It sounds like the touch pad has a bad spot in it and is working intermittently when you attempt to use it. It's possible for an issue like this to be covered under your vehicle’s warranty. If you are...

Q: How often should I change the drive belt

Hello. Your car was equipped with an EPDM-based (ethylene propylene diene monomer) serpentine belt that theoretically can last the lifetime of that vehicle. It will certainly last at least ten years or 150,000 miles, whichever comes first. Nevertheless, belts can...

Q: I bent my rear sway bar pretty bad. Had it replaced, but the wheel is still a little bent. What else can be the problem?

Hi there. The rear wheel being out of alignment, could be the result of a bent strut assembly, a bent trailing/control arm, a bent bearing knuckle and/or bent rear subframe. Replacing components without diagnosis can be expensive and time consuming...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.