Q: Question
My son-in-law is rebuilding a 1989 Camaro for my daughter, he claims the ball joints don't show typical signs of wear, me being the father an experienced driver for years owning over 15 vehicles all high mileage, I have seen the inside of garages a lot, spoke with many mechanics, plus lots of fun self repairs, I have a tendency to caution on the safe side when it comes to front end suspension, control arms and ball joints, my point being a car thats 28 years old in your opinion replacing these vital parts is a good safe practice, would you agree?
Thanks in Advance
Russ
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I adjust the seat belt height?
The shoulder strap on the front seat belts can be adjusted to best fit the driver and the front passenger. The belt is adjusted at the shoulder anchor, which is where the belt retracts into. To raise the height of...
Burning smell from fuse box
An electrical burning smell coming from the fuse block is never a good sign. Your fuse block is a major junction in the supply of power to most of your engine management system and accessories. A proper inspection should be...
Loss of horsepower and gas mileage
Hello. If timing is believed to be the issue, I suggest to not start the vehicle until the timing is properly set. If anything in the timing system itself is loose, it will cause the timing to become off. Off...
Car leaking antifreeze
It is possible that the leak is coming from a hose; depending on which hose or water outlet the hose is connected to, this could be a relatively simple repair. However, the cooling system should be pressure-tested to verify the...
Brakes bad and car running rough
Hi, the first thing to do is to figure out why the Check Engine light is on. A certified technician will be able to hook up a computer to the car which will read the DTC (Diagnostic Trouble Code) which...
battery very good but wont start.
When you are having the no crank condition, the system will need to have the starter tested to see if it is getting power from the ignition system to operate it. I have seen the starter not work (https://www.yourmechanic.com/services/starter-replacement) and...
RPMs increase at traffic light with foot on clutch
Hi there. We will be happy to help with your 2005 Honda S2000. The surging you are experiencing is very likely a result from a stuck rotary air valve inside of the idle air control valve. This is a common...
I changed my front mail seal and Harmonic balancer.
The front crank shaft damper is on a key way and it should not matter if the engine moved when loosening or tightening the damper harmonic balancer. The camshaft will move in and out a little bit and this is...
RPM not increasing Yanmar 6LY2A -STP
Hi there - there are a couple of possibilities here for the "won't get to engine max revs" condition. This engine has a governor, set at 3,000, and a malfunction of the governor could be limiting RPM. It's also possible...
Related articles
2012 Toyota Prius vs. 2012 Chevrolet Volt: Which One Should I Buy?
While these two vehicles are both certainly cost-effective to drive, they can be difficult to compare due to the Prius’ entry in the mid-size category and the Volt living squarely in the compact car category. Both of these vehicles are...
The Top 5 Selling Cars in Alabama in 2012
2012 2012 was a great year in Alabama for auto manufacturing, but that wasn’t the only bright spot. Vehicle sales in Alabama were also robust in 2012. Nothing much changed in terms of the vehicle types that were most popular...
Top Automotive News & Stories: October 1-7
BMW i5 images leak, an ultra-lux Jeep, hydrogen-fueled Colorado ZH2, Fisker's electric future, record plug-in sales, NHTSA Road to Zero, and more.
Browse other content
Estimates
Cities
Maintenance