Q: Pully fell off
Had my main pully fail on me, car stalled and kept trying to start it. Never did. Had it fixed and car stalled again. The guy that fixed it said there's a pin that goes into the engine and that it got bent. And stripped the bolt and I think he said the threads in the engine. My car now shakes like crazy when started. He told me I need a new engine and offered me 800 for my car.
My car has 157000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Car shuts off when stopped or going slow
There are many reasons why a vehicle may stall at a stop or at low RPM. I would recommend having your vehicle's stalling issue inspected (https://www.yourmechanic.com/services/car-is-stalling-inspection) at by a knowledgable technician, such as one from YourMechanic, to determine the exact...
Coolant leak around water pump
Hi. This is a sign that the seals in the water pump are beginning the fail. Behind the pulley, there should be a small hole for the coolant to leak out of. Without the hole, coolant could seep into the...
Car starts then dies car jumps into gear when putting in drive
The most common problem is the transmission solenoid pack sticks and needs to be replaced. The manufacturer has a technical service bulletin (TSB) number NTB06-005 2005. It calls for replacing the solenoid valve assembly in the transmission.
Service stabilizer and traction control warning is on.
Your car is equipped with wheel speed sensors (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement) at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system which are controlled by the car's ECU. When the...
oil level not showing correctly on the dipstick
Hi there. At what point on the dipstick are you using to confirm "full"? Are you referring to where the top of the oil is located on the dipstick? This can be misread easily and sometimes gets the best of...
Popping noise when I turn my 1999 ford expedition
This sounds like you may have wheel bearings that are going out. A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the surface of the rollers...
Slippery road light on dash
Hello There, This light is your traction control light illuminating after detecting slippery conditions on the road. The traction control system monitors the steering stability of the vehicle and engages when loss of traction has been detected. This is done...
How many psi does the power steering hose withstand
Two types of hose are used in power steering applications, a low pressure hose for the return (to reservoir) fluid and a high pressure hose for pump discharge. Low pressure hose is generally rated at 400 PSI and operates at...
My engine light turns on, and i went to autozone to diagnosis, and it's faulty o2 sensor. Would you be able to replace it?
If code P0136 (https://www.yourmechanic.com/article/p0136-obd-ii-trouble-code-o2-sensor-circuit-malfunction-bank-1-sensor-2-by-jay-safford) sets the only way you can determine if the oxygen sensor has failed is to use an automotive scope to graphically depict the sensor output waveform (it will look roughly like a sine wave) and switching...
Related articles
The Best Used Cars to Buy for Senior Citizens
Everyone Everyone needs a way to get around. You need to get groceries, get to doctors’ appointments, visit with family and more. However, senior citizens have very different needs when it comes to buying a used car than other demographics....
The Top 5 Selling Cars in Kansas in 2012
Kansas Kansas sees a varied climate with all four seasons, which means drivers in the area choose a variety of vehicles. In years past, some of the front-runners have included the Ford F-150, Buick and Toyota Camry. 2012’s top five...
How to Get Acura Dealership Certified
Acura car dealerships offer automotive technician jobs to mechanics who are Acura certified through the PACT program.
Browse other content
Cities
Estimates
Services