Skip the auto shop - Our mechanics make house calls

Q: pulling the motor need to know where to put the chain to the motor

asked by on

I got a tripod set up put the no where to put that chain to the motor to pul should I chain it to the manifold or what and I don't wanna but not mount for it

My car has 2 miles.
My car has an automatic transmission.

A: ...

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Average 10.5 mpg

It is best to abide by the recommendations stated in the owners manual. Turning off traction control may allow more stress to be put on the vehicle and cause accelerated wear in some areas. The traction control is not directly...

Q: Keep getting error message "Check Fuel Fill Inlet". I Googled it, many people have that problem, noone has permanent solution.

This is an ongoing problem and Ford has procedures to follow when refueling. If the leak continues then replace the filler neck with a new design filler neck with a better seal.

Q: When i start my truck it wont start up right away

This can be caused by many things. Without further detail as to the kind of sound and where specifically it is coming from this may be tough to diagnose without physically inspecting the truck and possibly test driving it for...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.