The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
The power front seats are controlled by the power switches on the outboard side of the seats, and can be adjusted in up to four different ways, depending on how your vehicle is equipped: 1. To move the seats horizontally,...
It depends on how fast it is leaking and what fluid is leaking. It could be power-steering fluid. If it's leaking a little power-steering fluid, it can be so expensive to fix, but you can choose to either have the...
The automatic transmission/power steering cooler is mounted in front of the A/C condenser. Only the front grill needs to be removed and the A/C should not need to be disturbed. Have another certified mechanic, like one from YourMechanic, verify the...
If the gears are not engaging and there is a grinding noise, then it is very possible that there is a failure within the transmission. The noise could be from a front pump failure or possible main shaft damage within...
Check the transmission fluid and see if its low or too high. Low or too high transmission fluid will cause the transmission to overheat. The transmission temperature sensor will pick up this condition and keep the vehicle from going into...
There are several schools of thought on this topic. While many can attest that synthetic oils can reduce friction and extend oil life, others prefer not to use synthetics in engines that have run on conventional oils for most of...
Hi there. If the coolant leaks out too much, the computer will see this from the coolant temperature and coolant level sensors and shut off the engine to prevent any damage to the engine. Check for the coolant leaks and...
Hello, and thank you for writing in. To check the fuse you must check the electrical resistance, or take a look at the filament inside to make sure it is not broken. This filament is the fine piece of metal...
Hello, thank you for writing in. The vehicle may be engaging the abs due to a sensor or electrical issue causing the vibrations. The quickest way to determine why the ABS warning light has illuminated is to scan the vehicle...