Q: Pressure holds freon on low side. High side doesn't rise above 50, evac for 1hour. Reliad still same 50 60 .compresor engages/disn
AC not cold, no leak low side. High side stays at 50 . Compresso engages,/disengages. could it be expansion valve or probably the compressor not building up to allow the high side to 200 high pressure. 0r the condenser is clogged from faulty dryer or expansion valve
My car has 190000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I use the headlight aiming control?
If you have a lot of weight in your vehicle, or are traveling up a steep hill, the headlights may be angled too high. This can cause visibility issues for not only you, but also any vehicle in front of...
Engine cranks but won't start. VTM-4 engine light is on. OBD shows codes P0365, P0340 & P0132
You say you turned off the engine as soon as the vehicle was stopped. Does this mean the engine still runs? The VTM-4 light is for the traction control (https://www.yourmechanic.com/article/how-does-traction-control-work) and you may have a problem with the system, which...
will only start full throttle and will only stay running if it's full throttle rpms don't go passed 1500 and keeps fouling plugs
If the engine is equipped with a throttle body injection system, then you should disconnect both injector harnesses and then turn the engine on to see if it looks like the injectors are putting fuel into the engine or the...
What service should I perform on the car besides the oil and filter change?
Your vehicle should be serviced on a regular basis (https://www.yourmechanic.com/scheduled-maintenance/nissan-xterra/) and different services are done at different mileages. If you are not sure of what service to do or what is needed, then I suggest you have the vehicle oil...
Epc Light & Sensor
I'm curious if there are any fault codes stored in the engine's computer. The mass air-flow meter or sensor is not the "EPC" sensor. If the vehicle is not running properly with the new mass air meter, there may be...
My car battery light,oil light and park light stays on while the car is off
When you turn your key to the on position before starting the car, the car's computer runs through a series of system checks causing many of the lights on the dash to display for seconds before starting the engine. These...
How many spark plugs and does it have a coil pack
Hi There, Your vehicle should have 6 spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement); one for each cylinder. You should also have 6 coil packs (https://www.yourmechanic.com/services/ignition-coil-replacement); again one for each cylinder. Should you need further assistance with changing these, I would recommend having a...
I have changed the clutch master cylinder seals on my car but the clutch pedal still does not return.
Hi there. Check the fluid in the reservoir. Top off all fluids that are low. If the fluid was low, then look for any visible leaks. If the fluid is full and there are no leaks, then check to see...
Is it bad when oil gets into the throttle body?
Hello, I believe what you are describing is a problem with your PCV valve. A bit of oil in the throttle body is not going to harm your motor and is certainly not going to cause it to blow up....
Related articles
Symptoms of a Bad or Failing AC Pressure Switch
If the AC is cutting on and off rapidly, unable to cool the cabin, or failing to turn on the compressor, you should replace your AC pressure switch.
How to Do a Compression Test
A compression test diagnoses many engine problems. If a compression test is below the manufacturer's specifications, there's an internal engine issue.
How to Replace a Car Air Conditioning (AC) Compressor
If the AC compressor fails, it can cause the air conditioning system not to work. This article covers how to locate, remove, and install a compressor.
Browse other content
Estimates
Maintenance