Q: Pop in the front right of my engine

asked by on

I was accelerating quickly when I heard a popping sound. It was in the right front engine area. It rattled for about 5 minutes - then stopped. Then my car started shaking. What caused this and what I should do?

The noise you heard may have been the timing chain rattling; the chain may have jumped and a valve hit the piston, so it is misfiring and running rough.

I would have a mechanic inspect your car’s shaking issue to see if this is what happened, or if you are having a different problem.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Pop in the front right of my engine

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car only cranking when gas pedal pumped

The first thing that causes this particular engine to run rough is the ignition coil and usually will start to fail around 75,000 miles. The secondary winding in the coil will fail and not provide enough voltage to get a...

Q: SUV stops & idles at red lights

I would recommend having your alternator tested. If the voltage regulator inside the alternator has failed allowing the alternator to overcharge the battery, symptoms such as the one your described may occur. These symptoms would be the result of the...

Q: Urgent Car Pulling

The cause of the smoke seems to of went away a month ago. You may have got a stuck caliper that caused the smoke back then. If you think the pulling is due to the brakes then you should have...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.