Skip the auto shop - Our mechanics make house calls

Q: Passenger's side seat stuck.

asked by on

My passenger's side seat won't snap back into place and is stuck forward. It is not a power seat. The last time it happened the mechanic was able to put the cable back into place and it started working again.

I would ask for some assistance from one of the mechanics at YourMechanic to help get your seat fixed. It is possible that the cable you are talking about has come out of place again.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Crank, no start

It is possible either a cam or crankshaft sensor has failed. The engine control unit relies on these sensors to detect engine rpm as well as to signal the tachometer. If one of them has failed, the ecu is not...

Q: My 2002 Ford Expedition is running too lean with misfires.

Hello. It sounds like you may have a few issues going on here. I usually start by checking the codes in the computer myself. This will give me a good idea of what my be going on and what cylinders...

Q: How do I tilt the head restraints?

The tilting head restraints can be adjusted to improve your comfort. To adjust the tilt of the restraint, simply push or pull it forward until it is at the desired angle.

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.